Connecting the Power/Turning on the DVD player
Before connecting
•Make sure that all the connections on pages
STANDBY/ON
STANDBY indicator
TOP MENU | URSOR | MENU |
RETURN |
| SETUP |
| P |
|
| USH TO E |
|
ON 
STANDBY
•Before unplugging the player from the power outlet, make sure you first switch it into standby.
•For the above reasons, do not plug this player into a switched power supply found on some amplifiers and AV receivers.
To a wall outlet
2
STANDBY/ON
STANDBY
Remote
controller
Press [STANDBY/ON] button on the DVD player or [ON] on the remote controller.
Turn on your TV and select the input through which the DVD player is connected.
The DVD player turns on and the STANDBY indicator turns off.
•To put the DVD player in the standby mode, press [STANDBY/ON] on the DVD player, or [STANDBY] on the remote controller.
•While the STANDBY indicator lights up, the DVD player can receive signals from the remote controller.
•Setting the [STANDBY/ON] button to standby does not shut off the power completely.
1 | Plug the supplied power cord into |
| |
| the AC INLET and then into the |
| power outlet on the wall. |
•Do not use a power cord other than the one supplied with the DVD player. The power cord supplied is designed for use with the DVD player and should not be used with any other device.
•Never have the power cord discon- nected from the DVD player while the other end is plugged into the wall out- let. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.
Note:
•This player features a screen saver and an auto power off function. If the player is stopped and no button is pressed for 15 minutes, the screen saver starts (see page 52). If the disc tray is closed but no disc is play- ing and no control is pressed for 20 minutes, the player automatically goes into standby (see page 54).
26
