Onkyo DV-SP504E instruction manual Connecting the DVD player, Video Output/Video Setting Matrix

Connecting the DVD player—Continued

Video Output/Video Setting Matrix

The following matrix shows how the video outputs work in relation to the various video settings.

		HDMI Output Setting (page 27)
Setting		On (default)			Off
	HD Resolution setting (page 43)			Progressive Setting (page 43)
Video output	Auto	480p/576p	720p, 1080i	Progressive		Interlaced
		(default)
HDMI	✓	✓	✓*3	No output		No output
Component	✓*1	✓*2	No output	✓*2		✓
S-Video	✓*1	✓	No output	✓		✓
Composite	✓*1	✓	No output	✓		✓
SCART*4 (European	✓*1	✓	No output	✓		✓
model only)

*1 Depending on the native resolution of your TV, you may get no picture.

*2 If your TV doesn’t support progressive scanning, you’ll get no picture.

*3 If your TV doesn’t support the HD Resolution settings of 720p and 1080i, you’ll get no picture.

*4 With the SCART Output Setting, you can choose RGB, S-Video, or composite video for the SCART output. However, when HDMI is on, you cannot select RGB. Also, when RGB is selected, nothing will be output by the component video output (see page 48).

Audio Output/Audio Setting Matrixes

■Digital Audio Output/Audio Setting Matrix

The following matrix shows how the digital audio outputs work in relation to the Digital/HDMI Audio Out setting.

Setting	Digital/HDMI Audio Out setting (page 48)
Digital	All (default)*a	PCM*a	Off
audio output
HDMI	✓	✓*b	No output
Digital (optical & coaxial)	✓	✓*b	No output

Audio from SACDs is not output by the HDMI OUT or optical or coaxial digital audio outputs. It’s only output by the analog audio outputs. Audio from the multichannel area of a DVD-Audio disc is also only output by the analog audio outputs.

*a	If your TV or amp doesn’t support higher sampling rates, set the Linear PCM Out setting to Down Sample On (page 48).
*b	Dolby Digital and DTS sources will be converted to PCM. If your TV or amp doesn’t support Dolby Digital and DTS, choose this
	option.

■Analog Audio Output/Audio Setting Matrix

The following matrix shows the recommended audio settings for each analog audio output.

	Speaker Configuration (page 48)
Setting	5.1 channel (default):	2 channel:
	Subwoofer: On	Subwoofer: Off
Analog audio output	Front: Small	Front: Large
	Center: Small	Center: Off
	Surround: Small	Surround: Off
2-channel (FRONT/D.MIX)		✓*c
Multichannel	✓
SCART (European model only)		✓*c

For 5.1-channel playback with an SACD, press the [AUDIO] button to select the multichannel area of the disc. For 2-channel playback, select the 2-channel area.

*c If your TV or multichannel amp has a Dolby Pro Logic decoder built in, by setting the Downmix Setting (page 50) to Lt/Rt, multichannel sources can be down mixed and output as an Lt/Rt mix.

19