Onkyo DV-SP504E Before Making Any Connections, Basic Setup, Optical Digital Outputs

Connecting the DVD player—Continued

Before Making Any Connections

•Read the manuals supplied with your AV components.

•Don’t connect the power cord until you’ve completed all audio and video connections.

Optical Digital Outputs

The DVD player’s optical digital connectors have a shut- ter-type cover that opens when an optical plug is inserted, and closes when it’s removed. Push the plug in all the way.

Caution: To prevent shutter damage, hold the optical plug straight when inserting and removing.

RCA AV Connection Color Coding

RCA AV connections are usually color coded: red, white, and yellow. Use red plugs to connect right-chan- nel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and out- puts (typically labeled “L”). And use yellow plugs to connect composite video inputs and outputs.

The supplied AV cable is made up of an analog audio cable and a composite video cable.

	Analog audio
Right (red)	Right (red)
Left (white)	Left (white)
	Composite video
(Yellow)	(Yellow)

• Push each plug in all the way to	Right!
make a good connection (loose
connections can cause noise or
malfunctions).
• To prevent interference, keep	Wrong!
audio and video cables away from
power cords and speaker cables.

Basic Setup

The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In this setup, stereo audio is played through the speakers in your TV.

AV cable (Supplied)

L

R

ANALOG

INPUT

TV

VIDEO IN

This player is equipped with copy protection technol- ogy. Do not connect this player to your TV via a VCR using AV cables, as the picture from this player will not appear properly on your TV. (This player may also not be compatible with some combination TV/ VCRs for the same reason; refer to the manufacturer for more information.)

Power cord

To power outlet (Supplied)

1.Connect the VIDEO OUTPUT and AUDIO OUT- PUT FRONT/D.MIX 1 jacks to a set of AV inputs on your TV.

Use the supplied AV cable (RCA), connecting the red and white plugs to the audio outputs and the yel- low plug to the video output.

See the following page if you want to use other cable for the video connection.

2.Connect the supplied AC power cord to the AC INLET, then plug into a power outlet.

20