Onkyo DV-SP504E Audio Menu, Configuring the DVD player-Continued, Digital/HDMI Audio Out

Configuring the DVD player—Continued

SCART Output Setting (European model only)

With this setting you can select the video format to be used for the SCART AV CONNECTOR: RGB, S-Video, or composite video. Before changing this setting, refer to your TV’s manual to see if its SCART input can accept video signals in these formats.

Composite (default): Composite video offers stan- dard quality.

S-Video:S-Video offers the next best picture quality.

RGB: This format offers the best picture quality.

Notes:

•If you select a format that is not supported by your TV, the setup menu may disappear from the screen. If this happens, switch off your equipment, connect the DVD player to your TV with a composite video or S-Video cable, and then change this setting.

•When RGB is selected, nothing is output by the com- ponent video output and HDMI output.

Audio Menu

Digital/HDMI Audio Out

With this setting you can configure the optical, coaxial, and HDMI digital outputs.

All (default): Dolby Digital and DTS signals are out- put as they are.

PCM: Dolby Digital and DTS signals are down mixed to 2 channels and output as PCM.

Off: No digital signals are output.

Note:

• MPEG is output as PCM regardless of this setting.

Linear PCM Out

With this setting you can configure the DVD player to output digital audio with higher sampling rates (e.g.,

88.2kHz, 96 kHz) as it is or to down sample it to 48 kHz or below.

If the AV component you connect to the DVD player’s digital audio outputs supports 96 kHz digital audio, select Down Sample Off. Otherwise, select Down Sam- ple On.

Down Sample On: 196 kHz and 96 kHz sources are down sampled to 48 kHz, and 176.4 kHz and

88.2 kHz sources are down sampled to 44.1 kHz.

Down Sample Off (default): Sources are output as they are.

Notes:

•Some copy-protected DVD-Video discs may use

96 kHz digital audio only for D/A conversion to the analog audio outputs.

•With some discs, even if you select Down Sample Off, the digital audio will be down sampled, and in some cases may not be output by the DVD player’s digital audio outputs.

Speaker Configuration

With these settings, you can specify which speakers are connected and their sizes. These settings only apply to the DVD player’s analog multichannel output. If you connect to only the FRONT/D.MIX L/R jacks, set the Subwoofer, Center Speaker, and Surround Speaker set- tings to Off.

Note:

•The Speaker Configurations have no effect on 192 kHz/176.4 kHz DVD-Audio.

•To use the Speaker Configuration settings with SACD playback, in the SACD Audio Setup, select PCM.

■Subwoofer

On (default): Select if a subwoofer is connected.

Off: Select if no subwoofer is connected.

■Front Speaker

Large: Select if the front speakers are large.

Small (default): Select if the front speakers are small.

Note:

•If the Subwoofer setting is set to Off, this setting is fixed at Large and cannot be changed.

■Center Speaker

Large: Select if the center speaker is large.

Small (default): Select if the center speaker is small.

Off: Select if no center speaker is connected.

Notes:

•If the Front Speaker setting is set to Small, the Large option cannot be selected.

•The Center Speaker and Surround Speaker settings can only be set to the same size.

■Surround Speaker

Large: Select if the surround speakers are large.

Small (default): Select if the surround speakers are small.

Off: Select if no surround speakers are connected.

Notes:

•If the Front Speaker setting is set to Small, the Large option cannot be selected.

•The Center Speaker and Surround Speaker settings can only be set to the same size.

48