Onkyo DV-SP504E Connecting Your TV video connection, Connecting the DVD player-Continued

Connecting the DVD player—Continued

Connecting Your TV (video connection)

•Connect the DVD player directly to your TV. If you connect the DVD player through a VCR, TV/VCR combination, or video selector, the picture may be dis- torted because DVD-Video discs are usually copy pro- tected.

Using S-Video

If your TV (or other equipment) has an S-Video input, you can use this instead of the standard (composite) out- put for a better quality picture.

•Use an S-Video cable (not supplied) to connect the S VIDEO OUTPUT to an S-Video input on your TV (or monitor or AV receiver).

Line up the small triangle above the jack with the same mark on the plug before plugging in.

Compatibility of this unit with progressive-scan TVs.

This player is compatible with progressive video Macro Vision System Copy Guard.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOM- MENDED THAT THE USER SWITCH THE CON- NECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARD- ING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

Using SCART (European model only)

S VIDEO

TV

S VIDEO IN

Using Component Video

If your TV has a SCART-type AV input, you can use a SCART cable to connect this player to your TV. This type of connection carries both the sound and the picture, so there’s no need to connect up the AUDIO OUTPUT L/R and VIDEO OUTPUT jacks.

•Use a SCART cable (not supplied) to connect the AV CONNECTOR to an AV input on your TV.

AV CONNECTOR

You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equipment).

This will provide better quality picture than S-Video.

•Use a component video cable (not supplied) to con- nect the COMPONENT VIDEO OUTPUT jacks to a component video input on your TV (or monitor or AV receiver).

If you connect the component video output to a TV or another component that doesn’t support progressive scanning, be sure to turn off HDMI (see page 43). You can set the component video output to Progressive or Interlaced (see page 43).

SCART

TV

Y
	This connector can output composite video, S-Video, or
PB	RGB video. The default setting is composite, which
PR	should work with all TVs. Consult the manual that came
COMPONENT	with your TV to see if you can use one of the higher qual-
	ity settings. See page 48 for how to change the video out-
	put.

COMPONENT VIDEO IN

TV

Y PB PR

21