MTD 390 Shown manual Attaching Clutch Control Cables Forward Cable

Page 6

Welded

Handle

Fuel

Bracket

Shut-off

 

Brace

Valve

Handle

Crank

Handle

Hex Bolt

Cupped

Washer

Frame

Half

Briggs and Stratton Intek Engine

Hex

Lock Nut

Handle

 

Spark

 

Brace

 

 

Plug

 

 

Briggs and Stratton Standard Engine

Spark

Plug

Handle

Brace

Hex

Lock Nut

Tecumseh Engine

Figure 3

Attaching Clutch Control Cable(s)

Forward Cable

Attach the end of the forward cable to the bracket underneath the handle assembly as follows. (On model 390, the forward clutch cable is the cable which is

attached closer to the rear of the tiller).

Loosen the hex nut on the threaded rod near the end of the cable, and move it up the rod as far as it will go.

Unthread the rod from the rest of the cable. Hook the “Z” end of the rod into the bracket underneath the handle assembly from the right hand side. See Figure 4.

Thread the rod back into the cable until the cable is straight. Do not tighten it enough to put any tension on the spring.

Thread the hex nut down against the end of cable. Use a pair of pliers and a wrench to lock the nut against the rod.

NOTE: Do not overtighten control cable. Too much tension may cause it to break when engaged.

“Z” End

Hooked In

Bracket

Threaded

Rod

Hex Nut

Cable

Models 340 thru 345

Figure 4

Reverse Cable (Model 390 Only)

The reverse clutch cable is the cable which is attached closer to the front of the tiller. Attach the end of the reverse cable to the reverse tine drive clutch lever, above the handle assembly, in the same manner as you attached the forward cable. See Figure 5.

Reverse Tine

Threaded

Engagement Handle

 

Rod

 

Hex Nut

Reverse

Cable

“Z” End

Hooked In

Bracket

Model 390

Figure 5

6

Image 6
Contents OPERATOR’S Manual Table of Contents Important Safe Operation Practices General OperationChildren Assembling Your Tiller Setting Up Your TillerAttaching The Handle Assembly Removing Unit From CartonAttaching Clutch Control Cables Forward Cable Throttle Control Final Clutch AdjustmentKnow Your Tiller Models 340 thruOperating Your Tiller Gas and Oil Fill upStarting Engine Models 343 Using Your TillerTo Stop Engine Wheel PositionDepth Stake Adjustment Controlling Speed And Tilling DepthTransporting The Tiller CultivatingWheel Adjustments Clutch Control AdjustmentsTine Width Adjustment Depth Stake AdjustmentMaintaining Your Tiller OFF-SEASON Storage Forward Drive Belt See FigurePossible Causes Trouble Shooting GuideTrouble Corrective ActionModel 340 Thru Part Description 711 Model 340 Thru Model Description 25 26 5022 Model MANUFACTURER’S Limited Warranty

390 Shown specifications

The MTD 390 is a notable product in the range of powerful and efficient garden tools designed for both professional landscapers and avid gardeners. This versatile machine is engineered to tackle various landscaping tasks with precision and ease. Its combination of robust design, cutting-edge technologies, and user-friendly features make it an essential tool for maintaining pristine gardens and outdoor spaces.

At the heart of the MTD 390 is its powerful engine that provides reliable performance. The engine is designed for optimal efficiency, ensuring that users can complete their tasks without unnecessary downtime. With a displacement that allows for high torque and consistent power delivery, the MTD 390 easily handles thick grass and dense foliage.

One of the standout features of the MTD 390 is its advanced blade technology. The cutting deck is equipped with precision-engineered blades that provide a clean and even cut, promoting healthy growth in lawns and gardens. The adjustable cutting height allows users to customize their mowing experience, accommodating different grass types and seasonal requirements. This flexibility ensures that every user can achieve the desired lawn appearance.

In addition to its cutting capabilities, the MTD 390 emphasizes comfort and usability. The ergonomic handle design minimizes strain during operation, allowing for extended periods of use without discomfort. The lightweight construction of the machine makes it easy to maneuver, even in tight spaces. Features such as quick-release systems for the cutting deck further enhance the convenience, making maintenance straightforward.

Technology plays a crucial role in the MTD 390's functionality. The machine is equipped with innovative start systems that ensure a swift ignition process, eliminating the frustrations often associated with traditional pull-start mechanisms. Furthermore, the design incorporates efficient fuel consumption, minimizing operating costs while maintaining powerful performance.

Durability is another key characteristic of the MTD 390. The robust frame and high-quality materials used in its construction ensure that it withstands the rigors of frequent use. Whether dealing with challenging terrains or changing weather conditions, the MTD 390 is built to endure, making it a long-term investment for users.

In summary, the MTD 390 stands out as a premium choice for anyone looking to enhance their gardening experience. Its powerful engine, advanced cutting technology, ergonomic design, and durable construction make it a reliable companion for achieving beautiful outdoor spaces. Whether you're a professional landscaper or a weekend warrior, the MTD 390 is equipped to handle all your gardening needs with efficiency and ease.