Bolens 12180 owner manual Introduction, BREAK-IN Operation, Starting and Stopping the Engine

Page 13

Section

4Operation

WARNING

Before operating your machine, carefully read and understand all safety (Section 1), controls (Section 3) and operating instructions (Section

4)in this Manual, in the separate Engine Owner’s Manual, and on the decals on the machine.

Failure to follow these instruc- tions can result in serious personal injury.

INTRODUCTION

Reverse Clutch Control

(knob on back of bracket)

Forward Clutch Bail

Depth Regulator Lever

Recoil Starter

Wheel Drive Pin

(on each wheel)

Figure 4-1

Read this Section of the manual thor- oughly before you start the engine. Then, take the time to familiarize yourself with the basic operation of the tiller before using it in the garden. Find an open, level area and practice using the tiller controls without the tines engaging the soil (put tines in “travel” setting). Only after you’ve become completely familiar with the tiller should you begin using it in the garden.

BREAK-IN OPERATION

Perform the following maintenance during the first hours of new operation (see “Maintenance” section in this manual and in the Engine Owner’s Manual).

1.Change engine oil after first 2 hours of new engine operation.

2.Check for loose or missing hardware on unit. Tighten or replace as needed.

3.Check tension on forward drive belt after first 2 hours of operation.

4.Check transmission gear oil level after first 2 hours of operation.

STARTING AND STOPPING THE ENGINE

Pre-Start Checklist

Make the following checks and perform the following services before starting the engine.

1.Read the “Safety” and “Controls” sections in this manual. Read the separate Engine Owner’s Manual provided by the engine manufacturer.

2.Check that the wheels are in the WHEEL DRIVE position (wheel pins must be through the wheel hubs and the wheel shaft holes).

3.Check unit for loose or missing hardware. Service as required.

4.Check engine oil level. See Engine Owner’s Manual.

5.Check that all safety guards and covers are in place.

6.Check air cleaner and engine cooling system. See Engine Owner’s Manual.

7.Attach spark plug wire to spark plug.

8.Fill the fuel tank with gasoline according to the directions in the separate Engine Owner’s Manual. Follow all instructions and safety rules carefully.

DANGER

GASOLINE IS HIGHLY FLAMMABLE AND ITS VAPORS ARE EXPLOSIVE.

Follow gasoline safety rules in this manual (see Section 1) and in the separate Engine Owner’s Manual.

Failure to follow gasoline safety instructions can result in serious personal injury and property damage.

13

Image 13
Contents Broncotm 5 HP Table of Contents Training SafetyUse slower engine speeds Keep children and pets awayTo Avoid Serious Injury Operating SymbolsTools/Materials Needed for Assembly AssemblyLoose Parts List Qty. Description IntroductionMove Tiller Off Shipping Platform Attach HandlebarInstall Reverse Clutch Cable Install Forward Clutch CableCheck Hardware for Tightness Check Level Transmission Gear OilCheck Air Pressure in Tires Check all nuts and screws for tightnessWheel Drive Pins Features and ControlsFreewheel Reverse Clutch Control Forward Clutch BailTo Operate the Forward Clutch Bail To Operate the Reverse Clutch ControlShallow Settings Deep Handlebar Height AdjustmentTo Adjust the Handlebars Depth Regulator LeverIntroduction OperationBREAK-IN Operation Starting and Stopping the EngineOperating the Tiller For reverse motion of the wheels and tines Turning the Tiller AroundStopping the Tiller and Engine Tilling depths Let the tiller do the workAvoid tilling soggy, wet soil Avoid making footprintsClearing the tines Tilling across slopes without using terracesTilling on slopes Tilling up and down slopesLoading and Unloading the Tiller Power CompostingRequired Maintenance Schedule MaintenanceProcedure EveryTiller Lubrication Transmission Gear OIL ServiceCheck for OIL Leaks Check HardwareBolo Tines Removing a Tine AssemblyTine Inspection Removing a Single TineCheck belt tension after every 10 operating hours EngineTo Check Belt Tension Replacement Belt Information Forward Clutch Bail AdjustmentReinstall the belt cover To Check Reverse Belt TensionEngine Cleaning AIR Cleaner Service Engine OIL ServiceSpark Plug Service CARBURETOR/GOVERNOR Control AdjustmentsTroubleshooting Transmission Gear OIL Specifications Tiller WeightFrame Weights Tiller LengthCustomer Service and Technical Service Warranty ServiceReplacement Parts Engine Service and Repair1905237 1/99