Craftsman 917.292402 owner manual To Start Engine, Fill Engine with OIL, ADD Gasoline

Page 9

BEFORE STARTING ENGINE IMPORTANT:Beverycarefulnotto allow dirtto enterthe enginewhencheckingor

addingoil or fuel. Use clean oil and fuel and store in approved, clean, covered con- tainers, use clean fill funnels.

FILL ENGINE WITH OIL

Remove hang tag from engine_

With engine level, remove engine oil filler plug.

Fill engine with oil to point of overflow- ing. For approximate capacity see

"PRODUCT SPECIFICATIONS" on page 4 of this manual.

Tilt tiller back on its wheels and then re- level.

With engine level, refill to point of over- flowing if necessary. Replace oil filler plug.

For cold weather operation you should change oil for easier starting (See "OIL VISCOSITY CHART" in the Maintenance section of this manual).

To change engine oil, see the Maintenance section of this manual.

Oil Level

Oil Filler

Plug

ADD GASOLINE

Fill fuel tank. Use fresh, clean, regular unleaded gasoline. (Use of leaded gasoline will increase carbon and lead

oxide deposits and reduce valve life.) IMPORTANT: When operating in Temperatures below 32°F (0°C), use fresh, clean, winter grade gasoline to help insure good cold weather starting.

WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methancT) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emp- tied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Us9 fresh fuel next season.

See Storage section of this manual for additional information.. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

,_CAUTION: Fill to within 1/2 inch of top of fuel tank to prevent spills and to allow for fuel expansion. If gasoline is acciden- tally spilled, move machine away from area of spill. Avoid creating any source of ignition until gasoline vapors have disap- peared. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

TO START ENGINE

,_CAUTION: Keep tine control in "OFF" position when starting engine.

When starting engine for the first time or if engine has run out of fuel, it will take extra pulls of the recoil starter to move fuel from the tank to the engine.

Make sure spark plug wire is properly connected.

Place throttle control in =FAST" position.

Move choke control to full "CHOKE" position. Grasp recoil starter handle with one hand and grasp tiller handle with other hand. Pull rope out slowly until engine reaches start of compression cycle (rope will pull slightly harder at this point).

Pull recoil starter handle quickly. Do not let starter handle snap back against starter. Repeat if necassary.

If engine tires but does not start, move choke control to half choke position. Pull recoil starter handle until engine starts.

When engine starts, slowly move choke control to "RUN" pos'dionas engine warms up.

NOTE: A warm engine requires less chok- ing to start.

Move throttle control_to desired running position.

Allow engine to warm up for a few min- utes before engaging tines.

NOTE: If at a high altitude (3000 feet) or in cold temperatures (below 32°F), the car- buretor fuel mixture may need to be

adjusted for best engine performance. See "TO ADJUST CARBURETOR" in the

Service and Adjustments section of this manual.

NOTE: If engine does not start, see trou- bleshooting points.

Image 9
Contents Crrftsmin Preparation Limitedtwo Year Warranty on Craftsman TillerTraining SEARS, Roebuckand CO., D/817WA, Hoffman ESTATES, ILOperation Customer Responsibilities Maintenance AgreementTools Required for Assembly Operators PositionUNC Assemble Handle Unpack CartonKnow Your Tiller Meets Ansi Safety RequirementsReverse Tine Operation ForwardTilling Transporting Your TillerTo Start Engine Fill Engine with OILADD Gasoline Cultivating Breaking in Your TillerTilling Hints Schedule Lubrication ChartGeneral Recommendations Before Each USEEngine Lubrication AIR CleanerTo Change Engine OIL Cooling SystemCleaning To Replace V-BELTS Engine Engine OIL TillerFuel System CylindersProblem CauseCorrection Engineoverheats ProblemRepair Parts Handle AssemblyDescription Belt Guard and Pulley Assembly Repair PartsKEY Part NO. no KEY Part DescriptionWheel and Depth Stake Assembly Tine Assembly KEY Part NO. NO, Description TransmissionDecals 220 Repairparts Gasket SET Toinstallseerepair015 203 Page Page Page £ARS

917.292402 specifications

The Craftsman 917.292402 is a powerful riding lawn mower designed to make lawn care efficient and enjoyable. Boasting a 20 horsepower Kohler engine, this mower delivers robust performance to tackle various terrains and grass types. Its 42-inch cutting deck allows for a wide swath, enabling users to mow large areas quickly while still providing precision in smaller, tighter spaces.

One of the standout features of the Craftsman 917.292402 is its hydrostatic transmission. This technology eliminates the need for shifting gears, offering smooth acceleration and effortless control. Users can easily adjust their speed to match their mowing conditions, making it suitable for both flat lawns and hilly landscapes. This feature enhances the overall user experience, allowing for more comfortable operation.

The cutting deck is equipped with a twin-blade system, which enhances the quality of the cut. The dual blades ensure a clean and even trim, distributing clippings evenly across the lawn for a more manicured appearance. Additionally, the mower includes a mulch kit, enabling users to finely chop clippings and return them to the soil, promoting healthier grass growth through natural fertilization.

Comfort is a key aspect of the Craftsman 917.292402's design. It features a high-back seat with adjustable settings, providing ample support during long mowing sessions. The user-friendly dashboard includes easy-to-read gauges, allowing operators to monitor essential information such as fuel level and speed without distraction.

Safety features are prominently integrated into the design, with a deck engagement switch and a safety starting system that ensures the mower only operates when the operator is seated. This thoughtful design helps to prevent accidents and provides peace of mind while mowing.

In terms of build quality, the Craftsman 917.292402 is built to last, featuring a heavy-duty frame and durable materials. This robust construction not only stands up to regular use but also ensures long-term reliability.

Overall, the Craftsman 917.292402 is an ideal solution for homeowners looking for a reliable, efficient, and comfortable riding mower. It combines power, technology, and safety features to deliver an exceptional mowing experience, making lawn maintenance a hassle-free task. Whether managing a large yard or simply maintaining a small garden, this mower is designed to meet diverse mowing needs with ease.