Craftsman 486.252444 owner manual HOW to USE Your Tiller, Before Starting Your Tiller

Page 7

The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over the spectacles or standard safety glasses.

HOW TO USE YOUR TILLER

BEFORE STARTING YOUR TILLER

FILL THE ENGINE WITH OIL! Your tiller engine is shipped without oil or gasoline. Add oil and gas as instructed in the separate engine manual.

WARNING: Never fill fuel tank indoors, or with the engine running, or while the engine is hot. Do not smoke while filling tank.

STOPPING YOUR TILLER

TINES

Raise tiller to transport position.

Pull forward on tine clutch lever.

ENGINE (Refer to separate engine manual.)

Move throttle control to "STOP" position.

Turn shut off to "OFF" position.

Never use choke to stop engine.

STARTING YOUR TILLER

(Refer to separate engine manual.)

CAUTION: The muffler and adjacent areas are hot!

• Check oil and gas in Tiller engine.

• Attach spark plug wire to spark plug.

• Pull forward on tine clutch lever to disengage tines. A safety switch prevents engine from starting while tines are engaged.

• Turn shut off to "ON" position.

• Move choke lever on engine to CHOKE position. (A warm engine may not require choking.)

• Move throttle control lever on engine to FAST position.

• Grasp starter handle and pull rope out slowly until engine reaches start of compression cycle (rope will pull slightly harder at this point). Let the rope rewind slowly.

• Pull rope with a rapid, continuous, full arm stroke. Keep a firm grip on starter handle. Let rope rewind slowly. Do not let starter handle snap back against starter.

7

Repeat instructions in two preceding paragraphs until engine fires. When engine starts, move choke control gradually to RUN position.

Allow engine to warm up for a few minutes before engaging tines.

ATTACHING TILLER TO TRACTOR

(See Fig. 6)

Rear wheel weights and tire chains can be used on tractor if additional traction is required for tilling.

Place Tiller on ground level and back up tractor to it.

Slide Floating Hitch of Tiller onto the tractor drawbar so that the hitch pin holes line up.

Insert hitch pin until it extends through bottom of Floating Hitch. Insert hair cotter pin into hitch pin.

FIG. 6

BREAKING IN YOUR TILLER

Break-in your belts, pulleys and the control before you actually begin tilling.

Start engine with tiller attached to tractor in transport position. Engage Tine Clutch Lever to start tine rotation. Allow tines to rotate for five minutes.

Check tine operation and adjust if necessary. See "TINE OPERATION CHECK" in the Service and Adjustments section of this manual.

Image 7
Contents Stop Table of Contents Training SafetyAssembly To Install the Tiller Tine AssembliesTo Remove Unit from Carton To Install Wheel Weights to Tiller Operation Before Starting Your Tiller HOW to USE Your TillerTransporting Your Tiller Maintenance Schedule MaintenanceTiller Lubrication Engine MaintenanceTo Replace V-BELT Service and AdjustmentsTiller Tine CareSpare Tine Drive Bolts EngineTroubleshooting Parts Qty Description Standard Hardware Purchased Locally Page Page Page Get it fixed, at your home or ours

486.252444 specifications

The Craftsman 486.252444 is a versatile and robust tool designed to meet the demands of both amateur and professional gardeners. It's particularly known for its performance and ease of use, making it a popular choice among those who appreciate efficiency without compromising on quality.

One of the standout features of the Craftsman 486.252444 is its powerful engine. The unit is equipped with a reliable gas engine that provides ample power, ensuring that it can handle various tasks, from mowing to snow removal. This engine is designed for quick starts and reliable operation, allowing users to work with confidence in different conditions.

In addition to its robust engine, the Craftsman 486.252444 boasts a wide cutting deck. This feature enhances productivity, allowing for larger areas to be covered in less time. The adjustable cutting height gives users the flexibility to set the mower to their desired grass length, fostering healthier lawn growth depending on the season and conditions.

Moreover, technology plays a pivotal role in the design of this tool. The inclusion of advanced ergonomics adds to user comfort, minimizing fatigue during extended use. The handle is designed to provide a secure grip, ensuring precise control. This feature is particularly beneficial when maneuvering around obstacles in the garden.

The Craftsman 486.252444 also incorporates user-friendly technologies such as an easy-start function and a straightforward control panel, making it accessible even for novice users. Safety is a priority, and this model includes features like a blade brake system, which halts the blades immediately when the user releases the handle, ensuring a safer working environment.

Durability is another hallmark of the Craftsman brand, and the 486.252444 is no exception. Constructed with high-quality materials, it is designed to withstand the rigors of regular use. Its maintenance is straightforward, with easily accessible components that allow for quick fixes and routine upkeep.

In summary, the Craftsman 486.252444 is a powerful and adaptable gardening tool that combines performance, user-friendly features, and reliable safety. With its strong engine, adjustable cutting deck, and ergonomic design, it promises to satisfy a wide range of gardening needs, making it a solid investment for anyone looking to enhance their outdoor maintenance experience. Whether tackling a large lawn or tackling seasonal changes, this tool offers versatility and dependability for all your gardening tasks.