Craftsman 486.252444 owner manual To Install Wheel Weights to Tiller

Page 5

TO INSTALL (WHEEL)

WEIGHTS TO TILLER

NOTE: Weights are not furnished with the Tiller. 30 lb. tractor wheel weights may be purchased to mount to the Tiller if extra weight is required. (Refer to the Operation section of this manual.)

•Remove two Carriage Bolts and Nuts from each Tine Shield, located approximately 3-1/2" from the front edge. See fig. 4.

•Place (Wheel) Weights on Tine Shield and secure with long Bolts and Nuts furnished with the Weights. See fig. 4.

FIG. 4

Image 5

Contents

Stop Table of Contents Training SafetyTo Remove Unit from Carton To Install the Tiller Tine AssembliesAssembly To Install Wheel Weights to Tiller Operation Before Starting Your Tiller HOW to USE Your TillerTransporting Your Tiller Maintenance Schedule MaintenanceTiller Lubrication Engine MaintenanceTo Replace V-BELT Service and AdjustmentsSpare Tine Drive Bolts Tine CareEngine TillerTroubleshooting Parts Qty Description Standard Hardware Purchased Locally Page Page Page Get it fixed, at your home or ours