Grease fitting
Fig. 7 | Fig. 9 |
- 1 | grease fitting i- |
tractor end |
Driveline
Fig. 15
DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
Inspect the Rotary Tiller thoroughly after assembly to be certain it is set up properly before delivering it to the customer. The following check list is a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.
-Check all bolts to be sure they are tight.
-Check that all cotter pins are properly installed
-Check that all lubrication points with grease fittings have been lubricated.
-Check that tines have been properly installed.
-Check gear box oil level.
-Verify safety labels are applied and are in good condition.
-Show customer how to make adjustments.
-Explain importance of lubrication to customer and point out lubrication points on tiller.
-Give this Operator's Manual to the customer and ask customer to become familiar with all sections of it.
7