Husqvarna DRT900E Attach Clutch Cable See Fig, Connect Shift ROD See Fig, Check Tire Pressure

Page 6

ASSEMBLY

ATTACH CLUTCH CABLE (See Fig. 6)

•Hook end of clutch cable through hole in control bar bracket.

CONTROL BAR

BRACKET

CONTROL

BAR

CLUTCH

CABLE

CONTROL BAR

BRACKET

END OF CLUTCH

CABLE

Fig. 6

CONNECT SHIFT ROD (See Fig. 7)

•Insert end of shift rod into hole of shift lever indicator.

•Insert hairpin clip through hole of shift rod to secure.

	SHIFT	HAIRPIN	SHIFT
			LEVER
		CLIP
	ROD		INDICATOR

Fig. 7

REMOVE TILLER FROM CRATE

•Make sure shift lever indicator is in “N” position (See Fig. 7)

•Tilt tiller forward by lifting handle. Separate cardboard cover from leveling shield.

•Rotate tiller handle to the right and pull tiller out of carton.

CHECK TIRE PRESSURE

The tires on your unit were overinflated at the factory for shipping purposes. Correct and equal tire pressure is important for best tilling performance.

•Reduce tire pressure to 20 PSI (1.4 kg/cm2).

HANDLE HEIGHT

•Handle height may be adjusted to better suit operator. (See “TO ADJUST HANDLE HEIGHT” in the Service and Adjustments section of this manual).

6

Image 6

Contents DRT900E Training Safety RulesMaintenance and Storage PreparationTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Install Handle See Figs , 4, Unpacking Carton See FigRemove Tiller from Crate Attach Clutch Cable See FigConnect Shift ROD See Fig Check Tire PressureMeets Ansi Safety Requirements OperationKnow Your Tiller Forward Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Reverse Wheels ONLY/TINES StoppedTo Transport TurningCultivating Before Starting EngineADD Gasoline To Start Engine See FigAdjust Wheels for Cultivating See Figs Tilling Hints See FigGeneral Recommendations Lubrication Chart MaintenanceMaintenance Schedule Before Each USEEngine AIR Filter See FigMuffler CleaningCooling System See Fig Spark PlugService and Adjustments TillerTire Care Ground Drive Belt Adjustment S e e Fig To Replace Ground Drive Belt See FigsTine Replacement See Figs , 28 To Adjust Throttle Control Cable See Fig To Adjust CarburetorFuel System StorageOther Engine OILTroubleshooting Points Repair Parts Handle AssemblyMAINFRAME, Left Side MAINFRAME, Right Side KEY Part NO. NO. Description Tine Shield Tine Assembly Decals 10.28.10 CL