ASSEMBLY
ATTACH CLUTCH CABLE (See Fig. 6)
•Hook end of clutch cable through hole in control bar bracket.
CONTROL BAR
BRACKET
CONTROL
BAR
CLUTCH 
CABLE
CONTROL BAR
BRACKET
END OF CLUTCH
CABLE
Fig. 6
CONNECT SHIFT ROD (See Fig. 7)
•Insert end of shift rod into hole of shift lever indicator.
•Insert hairpin clip through hole of shift rod to secure.
SHIFT | HAIRPIN | SHIFT | |
CLIP | LEVER | ||
ROD | |||
| INDICATOR | ||
|
|
Fig. 7
REMOVE TILLER FROM CRATE
•Make sure shift lever indicator is in “N” position (See Fig. 7)
•Tilt tiller forward by lifting handle. Separate cardboard cover from leveling shield.
•Rotate tiller handle to the right and pull tiller out of carton.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at the factory for shipping purposes. Correct and equal tire pressure is important for best tilling performance.
•Reduce tire pressure to 20 PSI (1.4 kg/cm2).
HANDLE HEIGHT
•Handle height may be adjusted to better suit operator. (See “TO ADJUST HANDLE HEIGHT” in the Service and Adjustments section of this manual).
6