Husqvarna 966957301 Throttle Cable, ON/OFF Switch, Pre-Operation, Starting Instructions

Page 6

THROTTLE CABLE

Unwind throttle cable from around engine. CAUTION: Be careful not to kink cable.

ON/OFF SWITCH

1.Place 1 3/8” long slotted pan head screw into switch plate and down through hole in upper right hand handlebar. (See Fig. 2)

2.Place rubber isolator over screw underneath handlebar. Follow with throttle trigger body.

3.Place flat nut though slot in side of throttle trigger and tighten screw to secure throttle control to handlebar.

KILL WIRE

CONNECTION AT

CONNECTION

SWITCH END

AT ENGINE END

Fig. 2

4.Push 2 terminals of kill wire (See Fig. 3) onto 2 prongs of shut off switch.

5.Push other end of kill wire onto engine.

SCREW

SWITCH

HANDLEBAR

RUBBER

ISOLATOR

THROTTLE

CONTROL

FLAT NUT

Fig. 3

6.Retain kill wire and throttle cable to right handle bar using two (2) nylon tie straps. Cut off loose ends of the straps. (See Fig. 4)

GRIPS

TIE STRAPS

Fig. 4

7.Install grips.

8.Tine spacers provided can be placed in toolbox or garage shelf (see page 9).

8. Fuel mix cup is provided for your convenience.

THIS COMPLETES THE ASSEMBLY OF YOUR UNIT. RE-CHECK ALL SCREWS AND NUTS TO BE SURE THEY ARE TIGHT.

As with any item of power equipment, it is necessary that you learn and observe ALL Safety precautions. This includes care of the machine as well as personal safety.

DO NOT BE CARELESS!

Read the operating instruction manual carefully. Be thor- oughly familiar with the controls and proper use of the equipment.

Always wear goggles or face shield for eye protection. It is advisable to wear protective head gear. These precautions are used to prevent the possibility of being struck by objects thrown from the rotating tines.

It is advisable to wear a long sleeve shirt or jacket. Don’t wear shorts. Don’t wear loose clothing or jewelry.

Do not operate this unit when barefoot or wearing open sandals. Always wear substantial footwear; leather work shoes or short boots function well for most people. Either will help protect the operator’s ankles and shins from objects being thrown by rotating tines.

PRE-OPERATION

DANGER!

DO NOT SMOKE while filling the tank, or starting the engine. Be sure the proper fuel is used. Read the fuel instructions in the manual and/or on the engine. Always store the fuel to be used in this machine in a properly marked container that is approved for such use.

STARTING INSTRUCTIONS

Be sure you are using the proper fuel and have read and under stand all the instructions on the preceding pages.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Specifications OWNER/OPERATOR ManualSafety Rules and Precautions SafetySymbol OperationPoisonous GAS Keep Children and Pets AwayTable of Contents ASSEMBLY-DRAG STAKE/WHEEL Transport Item Order DescriptionPRE-OPERATION ON/OFF SwitchThrottle Cable Starting InstructionsTypical Engine Choke Symbol Operating Technique and Handy Tips Full Choke No ChokeADJUSTMENTS/MAINTENANCE Tine SpacersTine Replacement To Clean ScreenTo Clean and RE-OIL Foam Filter Spark PlugTine Patterns for Stony or Rocky Soil See Fig Narrow Cultivating Throttle Cable Inspection See FigItem Order Description QTY. REQ Transmission Assembly Item Order QTY. REQ DescriptionENGINE/TRANSMISSION/TINES/SHIELD Order Description QTY. REQTransport KIT Assembly Order no Description QTY. REQPage Page Page Warranty Statement

966957301 specifications

The Husqvarna 966957301 is a versatile and powerful chainsaw that caters to both professional and avid outdoor enthusiasts. Celebrated for its robust design and advanced technology, this chainsaw has become a popular choice for cutting tasks ranging from tree felling to limbing and firewood cutting.

At the heart of the Husqvarna 966957301 is a highly efficient 50.2cc engine. This powerful engine provides a remarkable balance of performance and fuel efficiency, enabling users to complete tasks quickly without frequent refueling. The engine features an upgraded air injection system, which enhances air filtration and reduces wear on engine components, extending the life of the chainsaw.

One of the standout features of the Husqvarna 966957301 is its lightweight construction. Weighing in at just over 10 pounds, this chainsaw is designed for ease of use and maneuverability. This ensures that even during extended periods of operation, users experience less fatigue and can work comfortably.

The chainsaw incorporates Husqvarna’s signature X-Torq technology, which significantly lowers fuel consumption and emissions. X-Torq design allows for a cleaner burn, thereby contributing to environmental sustainability while still delivering the power needed for tough cutting tasks. This technology not only benefits users by saving on fuel costs but also aligns with modern environmental standards.

For enhanced safety, the Husqvarna 966957301 features an integrated chain brake, which quickly stops the chain in the event of kickback. The ergonomic handle with anti-vibration technology minimizes vibrations during operation, further improving comfort and reducing strain on the hands and arms.

Another notable characteristic is the Quick-release air filter, which makes maintenance and cleaning easier. With an easy-access location, users can efficiently change or clean the air filter without complicated disassembly. The tool-less chain tensioning mechanism allows for quick adjustments on the go, ensuring optimum cutting performance.

Lastly, the Husqvarna 966957301 is designed with durable materials, providing both longevity and reliability. Whether for professional logging or home landscaping, this chainsaw stands out for its innovative features, exceptional power, and ease of use, making it a valuable tool for any chainsaw enthusiast.
Top Page Image Contents