Husqvarna 96093000901 owner manual Tine Replacement See Figs , 25

Page 17

SERVICE AND ADJUSTMENTS

TINE REPLACEMENT (See Figs. 24, 25 and 26)

CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines.

A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines. A tine this worn needs to be replaced.

To maintain the superb tilling performance of this ma- chine the tines should be checked for sharpness, wear, and bending, particularly the tines which are next to the transmission. If the gap between the tines exceeds 3-1/2 inches they should be replaced or straightened as necessary.

New tines should be assembled as shown in Fig. X3. Sharpened tine edges will rotate rearward from above.

NEW TINE

WORN TINE

Fig. 24

TRANSMISSION

TINE

3-1/2" MAX

TINE

 

Fig. 25

SHEAR PIN

 

SHARP EDGE

COUNTER

TINE

 

ROTATION

SHEAR PIN

SHARP

EDGE

SHARP EDGE

SHARP

EDGE

HAIRPIN CLIP

SHARP tine_12 EDGES

Fig. 26

17

Image 17
Contents RTT900 Maintenance and Storage Safety RulesTraining PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation Tine Operation with Wheel Drive HOW to USE Your TillerForward Wheels ONLY/TINES Stopped Reverse Wheels ONLY/TINES StoppedTo Transport TurningBefore Starting Engine Fill Engine with OIL See FigTo Start Engine See Fig ADD GasolineCultivating Tine Shear PinsTilling Hints Lubrication Chart MaintenanceGeneral Recommendations Before Each USEEngine AIR Cleaner See FigCooling System See Fig CleaningMuffler Spark PlugTire Care Service and AdjustmentsTiller To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment S e e FigTine Replacement See Figs , 25 Other StorageFuel System Engine OILTroubleshooting Points Handle Assembly Repair PartsMAINFRAME, Left Side KEY Part NO. NO. Description MAINFRAME, Right Side208cc Transmission19.5b Tine Shield      Tine AssemblyDecals Service Notes Warranty Statement