Husqvarna CT20 manual Lubrication, Sion to cool before filling with Grease

Page 18

MAINTENANCE

LUBRICATION

er if it is damaged (see the Repair Parts

Every 25 hours and/or at the beginning of

section in this manual).

 

each season, make sure the gear box is

6. Clean and lubricate the tine shaft with a

filled with lubricant (see Figure 10). Tubes of

few drops of oil.

gear lubricant are available from most auto-

7. Reinstall the left side tines.

motive supply stores. Use portable tool

8. Remove the right side tines. Check the

grease such as Lubriplate 630AA (Product

felt washer for damage. Clean and oil

No. 06787, 1−3/4 oz. tube) or Lubriplate

the tine shaft. Reinstall the right side

GR−132 (Product No. 15892, 10 oz. tube).

tines.

After cleaning and before storage, apply oil

 

to the tine shaft (see Figure 10).

 

Air Vent Screw

WARNING: Allow the transmis-

 

sion to cool before filling with

 

grease.

 

1.Remove both left side tines. See “How To Replace The Tines” in the Service and Adjustments section.

2.

Remove the air vent screw (see

Tine

 

 

Figure 10).

Shaft

 

3.

Mount a grease gun onto the grease fit-

 

 

 

ting. Fill the transmission until the

Felt

 

 

grease begins to come out of the air vent

 

 

Washer

 

 

screw hole.

 

 

Grease Fitting

 

4.

Reinstall the air vent screw.

 

5.

Check the condition of the felt washer

Figure 10

 

 

 

 

(see Figure 10). Replace the felt wash-

 

 

 

 

 

 

 

 

 

 

 

 

 

HOW TO CLEAN THE TINES

Always remove dirt and debris from the culti- vator after each use. Remove any string, wire or vegetation that may become lodged in the mechanism and stop the tines from rotating.

1.Release the throttle control and move the on−off switch to the OFF position. Disconnect the spark plug wire from the spark plug.

2.While wearing gloves, remove the latch pins that secure the tine assemblies to the shaft (see Figure 11). Remove the tines from the shaft.

3.Remove any lodged debris from the shaft and tines. Clean and lubricate the tine shaft with a few drops of oil.

4.Reassemble the tines on the shaft and secure with the latch pins.

5.Connect the spark plug wire to the spark plug.

Tine

 

 

.

Latch Pin

Figure 11

 

MS−3615MA

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Instruction Book Model CT20 Warranty Statement Husqvarna Table of Contents OWNER’S Information Responsibility of the OwnerOperating Safety Safety RulesFuel Safety Safe Operation Practices for CultivatorRepair / Adjustments Safety Safe StorageChoke OFF Half Choke Slow Fast Fuel Oil − 10-16 x 1-1/2 inch Screw − Tie StrapHOW to Remove the Cultivator from the Carton AssemblyAssembly Parts Packed Separately in Carton HOW to Assemble the HandleOutside of the lower handle as you Tighten the knobsDle and damage the engine casing Checklist Operation Know Your CultivatorEYE Protection How To Set The Depth HOW to USE the CultivatorHow To Stop The Cultivator How To Operate The CultivatorHow To Prepare The Engine How To Mix The Fuel MixtureBefore Starting the Engine These areas HOW to Start the EnginePropel itself if the engine speed is ad- vanced from idle No ChokeSeed bed preparation 4 to 6 inches depth Hints for Depth Stake or Wheel AdjustmentCultivating Tips Heavy soil 4 inch depth or greaterCustomer Responsibilities MaintenanceProduct Specifications General RecommendationsLubrication Sion to cool before filling with GreaseMent spark plug Filter cover and the air filterTine Installation Service and AdjustmentHOW to Remove and Install the Tines Tine RemovalHOW to Adjust the Carburetor Engine Shown With Fuel Tank RemovedStorage CultivatorEngine Trouble Shooting Chart Trouble Cause CorrectionModel CT20 Factory no x37NAKEY 482 480 481 492 650 660 662 661 663 946 948 930 945 943 831 826 825 823 824 MS−3615MA

CT20 specifications

The Husqvarna CT20 is a robust and versatile compact tractor designed to meet the diverse needs of homeowners and landscape professionals alike. Famed for its blend of power, efficiency, and ease of use, the CT20 stands out in the market for its advanced features and technologies.

At the heart of the CT20 is a powerful engine that provides reliable performance, making it suitable for a wide range of tasks, from mowing lawns to handling snow removal. The engine is coupled with a hydrostatic transmission, allowing for smooth and effortless operation. This feature enables the user to adjust the speed and direction without having to shift gears manually, enhancing control and making it ideal for delicate or complex tasks.

The CT20 boasts an impressive cutting deck, which is designed for precision and efficiency. With adjustable cutting heights, users can achieve the perfect lawn finish, tailored to their preferences. The deck's innovative design ensures an even cut while reducing grass clippings left on the lawn, promoting a cleaner appearance after mowing.

Another standout feature is its all-terrain capability. The CT20 is engineered with robust tires that provide excellent traction and stability, making it capable of navigating various terrains effortlessly. This feature is particularly beneficial for users who have uneven or sloped land, ensuring that the tractor remains balanced and secure during operation.

Additionally, Husqvarna has incorporated several ergonomic features into the CT20. The operator seat is designed for comfort, even during prolonged use, and the intuitive controls are strategically placed for easy access. This focus on user comfort helps reduce fatigue and enhances overall productivity.

The CT20 is also compatible with a wide array of attachments, further expanding its versatility. Users can equip the tractor with implements such as snow blowers, tillers, or front-end loaders, transforming it into a multi-purpose machine capable of handling various projects throughout the year.

Finally, Husqvarna’s commitment to durability and reliability is evident in the CT20's construction. Built with high-quality materials and designed to withstand the rigors of daily use, this compact tractor ensures longevity and dependability, making it a wise investment for anyone looking to maintain their outdoor spaces effectively.

In conclusion, the Husqvarna CT20 is a powerful, efficient, and versatile compact tractor. With its user-friendly design, advanced features, and compatibility with various attachments, it caters to a wide range of tasks, making it an invaluable tool for homeowners and professionals alike. As it combines performance, comfort, and durability, the CT20 lives up to Husqvarna's reputation for excellence in outdoor power equipment.
Top Page Image Contents