Introduction, Installation | Raypak RHP100, RHP115, RHP160 guide

Introduction

WARNING

This pool/spa heat pump is an electromechanical machine that incorporates a pressurized refrigerant gas in a sealed system. ONLY trained and qualified service personnel should attempt to install or service this equipment.

Without proper training and knowledge of such equipment, any attempt to install or service the unit could result in serious injury or even death.

This manual contains important information on the use, maintenance, chemistry requirements and installation of your new heat pump. Proper installation and operation of the unit will increase the benefits you receive from the unit.

This heat pump is an extremely efficient, economical machine designed specifically for pool and spa heating. It is similar in design and operation to a typical residential air conditioning system. The heat pump employs a hermetic motor/compressor operating in a refrigeration cycle to extract heat from ambient air and deliver it to the circulating pool water.

As with all pool/spa heat pumps, compared to other types of pool heat pumps such as gas- or oil- fired, this heat pump has lower heating capacity on a BTU/hr basis. As a result, it will be required to operate longer to accomplish the desired results. It may, at certain times, operate as much as 24 hours per day. However, this should not be of concern to the owner, because the unit is designed to operate continuously. Even though it may operate continuously for many hours, it will still heat the pool with greater economy than other types of fossil fuel heaters.

You are advised to put a pool cover over the pool at night and other non-use periods. This will keep evaporation, the cause of the greatest heat loss, to a minimum, and so greatly reduce overall pool heating costs. During warmer weather, the pool cover may be required only at night.

I.Installation

•The placement of the pool heat pump is very important to minimize installation costs while providing maximum efficiency of operation, and to allow adequate service access.

•The unit is designed for outdoor installation and must not be installed in a totally enclosed area such as a shed or garage, unless ventilation is provided to ensure adequate air exchange for proper operation. Recirculation of cold discharge air back into the evaporator coil will greatly reduce the unit’s heating capacity and efficiency.

•When installed in a geographical location where freezing temperatures can be encountered, the water circuit should be drained to prevent possible freeze-up damage. See Section IX, Freeze Protection.

•The unit should be located as close as possible to the existing pool pump and filter to minimize water piping.

•All models feature an "up-flow" discharge for quiet operation. Air is pulled up through the evaporator coil and discharged through the top grill. Allow at least 8 ft clearance above the

unit for unrestricted air discharge. Do NOT install the unit under a porch or deck.

RHP160, RHP100, RHP115 specifications

Raypak, a renowned leader in the heating industry, has made significant strides in pool and spa heating technology with its RHP series models: RHP160, RHP115, and RHP100. Each model is designed to deliver high-performance heating solutions, catering to both residential and commercial needs.

The RHP160 is the powerhouse of the series, capable of heating large bodies of water efficiently. With an output of 160,000 BTUs, this model utilizes a high-efficiency copper heat exchanger, ensuring rapid heating while minimizing energy consumption. Its compact design allows for easy installation and is suitable for various configurations, making it an ideal choice for larger pools or spas. The RHP160 features advanced control systems that offer precise temperature regulation, ensuring user-friendly operation.

Next in line is the RHP115, which balances power and efficiency flawlessly. With a heating capacity of 115,000 BTUs, the RHP115 is perfect for medium-sized pools and spas. This model incorporates Raypak's innovative electronic ignition system, reducing the risk of fuel waste and allowing for consistent performance even in fluctuating outdoor temperatures. The RHP115 also boasts a durable cabinet that withstands harsh environmental conditions, ensuring longevity and reliability.

The RHP100 is the entry-level model in the series, yet it does not compromise on quality or efficiency. With a heating capacity of 100,000 BTUs, the RHP100 is designed for smaller pools and spas, making it an excellent choice for residential applications. This unit includes a user-friendly digital display that simplifies temperature adjustments and monitoring. Like its counterparts, the RHP100 features a robust heat exchanger that enhances efficiency and prolongs the system's lifespan.

All models in the RHP series are equipped with Raypak's state-of-the-art technology, including a built-in safety shut-off feature that ensures safe operation at all times. Moreover, each heater is compatible with various fuel options, including natural gas and propane, providing flexibility for users. In addition, with their sleek designs and low-profile silhouettes, these heaters blend seamlessly into any backyard or commercial environment.

Raypak’s RHP series is a testament to the company's commitment to quality, performance, and customer satisfaction. Whether you're considering the powerful RHP160, the versatile RHP115, or the compact RHP100, each model promises efficient heating and reliable operation, making them excellent choices for anyone looking to enhance their pool or spa experience.