SmartPool Inc Robo-Kleen warranty Installation, Power Supply Must not Fall Into Pool

Page 4

Underside of Mobile Cleaning Unit

 

Locking Tabs

Cleaning Brushes

Suction Ports

 

Locking Tabs

Installation

The power supply should be positioned so that Robo-Kleen can reach all the walls of the swimming pool and must be at a minimum distance of 10 feet from the edge of the pool.

CAUTION: INSURE THE THE 110V MAIN LINE OUTLET IS PROTECTED BY A GROUND FAULT CIRCUIT INTERRUPTER (GFCI) OR EARTH LEAKAGE CIRCUIT INTERRUPTER (ELCI). OTHERWISE, DEATH OR INJURY CAN RESULT.

DO NOT ALLOW POWER SUPPLY TO BECOME SUBMERGED IN POOL. ! DEATH OR INJURY CAN RESULT. DO NOT PLACE ON EDGE OF POOL.

POWER SUPPLY MUST NOT FALL INTO POOL!

To connect Robo-Kleen to the power supply, remove the cap on the transformer output socket. Plug the Robo-Kleen cord into the socket. Notice the plug and socket are indexed using pins.

Tighten the threaded plug cover so that the cord is securely attached.

4

Image 4
Contents Table of Contents Page Power Supply Installation Power Supply Must not Fall Into PoolCleaning Pattern OperationMaintenance Clean Filter BagAutomatic Shutdown and Removal Uncoiling cableFront Drive Wheels and Rear Idler Wheels ImpellerWinterization Twelve Month Limited Warranty