Disposable Filter Bag, In-Line Filter | Sony 480 specification

Disposable Filter Bag

To replace disposable bag:

1.Push tabs of bag clip assembly to the open position.

2.Disengage the alignment pin and remove the old bag.

3.Fit cuff of disposable bag over opening. Bag seam should face the back of the cleaner and hole in filter bag cuff should engage with alignment pin.

4.Close bag clip assembly to lock in place.

Disposable Bag

Alignment Hole

Back of Cleaner

Bag Clip

inOpen

Position

Alignment Pin

English

In-Line Filter

The in-line filter contains a filter

Open

screen to keep debris that is not caught by the pool filtration system out of the Polaris.

In-Line Filter

To clean this screen, pull it out of the in-line filter, rinse it and press it firmly back into place.

Backwashing the Pool Filter

Always disconnect the Polaris from the pool wall before cleaning or backwashing the pool filter. After cleaning or backwashing, let the filtration system run for at least five minutes to flush out the return lines before re-connecting the Polaris.

Storage and Winterizing

Never store the Polaris in direct sunlight. When storing for the winter, drain out all the water (freeze damage is not covered under the warranty). Remove the UWF from the pool wall using the UWF Removal Tool (part #10-102-00) included with the cleaner.