buttons at the same time, then release. Then press either WARMER ( + ) or COOLER ( - ) button to select skimming/heater mode
Standard Skimming/Heating Modes
F0 5 minutes of skimming per day (one 5 minute
F1 1 hour of skimming per day (one
F2 1.5 hours of skimming per day (one
F3 2 hours of skimming per day (one
Economy Skimming/Heating Modes
F4 1 hour of skimming/heating per day (one
F5 1.5 hours of skimming/heating per day (one
F6 2 hours of skimming/heating per day (one
Lock Modes
L1 Lock Out (disables all spa functions to permit filter cleaning) L2 Lock Mode (disables the jets and light buttons to prevent
unauthorized use of spa.) Skimming/heater cycle will continue to operate as programmed in this mode. The temperature display flashes when this function is enabled. Example: the “F3” skimming/heater cycle was enabled prior to choosing lock mode. The spa continues to perform the “F3” cycle until lock mode is canceled, allowing another cycle to be selected.
To set a time for the first skimmer/heating cycle, simply turn power on to the spa two minutes prior to the desired time. EXAMPLE: If you desire your first skimming/heater cycle to begin at 10:00 AM turn off power to the spa and turn it back on again at 9:58 AM. Note: start time is approximate and may vary slightly from day to day.
Page 29