Husqvarna HUV 4414-XP, HUV 4214 owner manual Engine OIL and Filter Change, Engine Oil Draining

Page 38

Engine Oil

 

1

1. Full Level 2. Safe Level 3. Low Level

 

804

818

Figure 15 Engine Oil Level Check

Figure 16 Center Access Panel

ENGINE OIL AND FILTER CHANGE

Engine oil and oil filter should be changed after the first 5 to 8 hours of operation. After that, the oil should be changed every 100 hours of operation or annually, whichever comes first.

Engine Oil Draining

1.Turn the key switch to the OFF position and remove the key. Place the Forward/Reverse handle in the NEUTRAL position. Chock the front wheels.

2.Disconnect the battery cables, negative (–) cable first. See WARNING “To avoid unintentionally starting...” in

General Warnings on page 10.

3.Raise the cargo bed, locate and remove the center access panel (1) (Figure 16).

4.Remove the oil filler cap to allow the oil to drain properly.

5.Position a pan designed for oil changes under the drain plug.

6.From the underside of the vehicle, use a socket or wrench to remove the drain plug (1) (Figure 17). Turn the plug counterclockwise and drain the engine oil into the pan. See following WARNING.

WARNING

•Do not attempt to change engine oil when the engine is hot or even warm. Hot engine oil can burn skin.

•Wear safety glasses or approved eye protection when servicing the vehicle. Wear rubber gloves when handling oil drain plug, oil filter, and oil drain pan.

7.Clean the oil drain plug threads with solvent to remove oil and oil residue. Make sure that the compression washer or sealing o-ring remains on the drain plug. Inspect the compression washer or the sealing o-ring and replace if necessary.

8.Use a socket or wrench to replace the oil drain plug (1) (Figure 17). Turn the plug clockwise and tighten to 14.5 ft-lb (20 N·m).

9.Replace the oil filler cap.

10. Replace the center access panel (1) (Figure 16), then lower and latch the cargo bed.

Page 36 2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner’s Manual

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Gasoline Utility Vehicles Page Page Foreword Table of Contents Page Safety Decal and Feature Identification Safety Decal and Feature IdentificationALL HUV 4214 and 4414 Vehicles Replace Rops if damaged. Do not attempt repair949 Proposition 65 State of California Practice SafetyPractice Safety Safety Details Safety DetailsGeneral Warnings General WarningsGeneral Warnings General Information General InformationModel Identification Controls and Indicators Controls and IndicatorsKEY Switch Instrument PanelBrake Pedal FORWARD/REVERSE ControlAccelerator Pedal Park Brake HandleDifferential Lock Control Park Brake Warning LightFront Axle Control Headlight Control LOW OIL Pressure Warning LightFuel GAUGE/HOUR Meter ROLL-OVER Protective Structure and Seat Belts Roll-Over Protective Structure and Seat BeltsSeat Latch and Adjustment Seat Latch and AdjustmentSee Vehicle Specifications on PRE-OPERATION and Daily Safety ChecklistPre-Operation and Daily Safety Checklist Performance InspectionDriving Instructions Driving InstructionsStarting the Vehicle Drive Train Operation Stopping the VehicleBed Latch BED LatchParking and Leaving the Vehicle See General Warnings onBed Locking Pin BED Locking PINRear Shock Absorbers Loading and Unloading Cargo Vehicle Load CapacitiesTowing with the Vehicle Towing with the VehicleTransporting on a Trailer Transporting on a TrailerStorage Preparing the Vehicle for Extended Storage StorageMaintenance MaintenanceReturning the Stored Vehicle to Service Change engine oil. See Engine Oil and Filter Change onPeriodic Service Schedule Periodic Service SchedulePeriodic Service Schedule Regular Interval Periodic Lubrication Schedule Periodic Lubrication ScheduleBrake Fluid Reservoir Brake Fluid ReservoirEngine OIL Level Check Engine OILBrake Fluid Engine OilEngine OIL and Filter Change Engine Oil DrainingEngine Oil Drain Plug and Oil Filter Wrench See following Note Remove Engine Oil FilterOIL Viscosity Engine Oil FillingGearcase Lubrication Gearcase LubricationLubrication Change Front Differential and Rear Transaxle Front differentialRear transaxle Rear Transaxle Drain PlugAIR Intake System AIR Filter ReplacementAir Filter Installation Air Intake SystemFueling Instructions Fueling InstructionsBattery BatteryUsing a Booster Battery Jump Starting Using a Booster Battery Jump StartingCleaning the Vehicle Cleaning the VehicleAccessories AccessoriesElectric Winch Accessory MUD Tire OptionSubsequent Owner Registration Vehicle SpecificationsSubsequent Owner Registration Vehicle Specifications DIMENSIONS/WEIGHTWarranties WarrantiesCalifornia Emission Control Warranty Statement HOW to Make a Warranty ClaimHusqvarna Explanation of Emission Control Warranty Moderate Emissions ControlEmissions Control IntermediateEmissions Control 103472540

HUV 4414-XP, HUV 4414, HUV 4214 specifications

The Husqvarna HUV 4414, HUV 4214, and HUV 4414-XP are all-terrain utility vehicles designed to excel in a variety of challenging conditions. These models are well-regarded for their robust construction, powerful performance, and advanced features, making them suitable for both professional and recreational applications.

Starting with the Husqvarna HUV 4414, this utility vehicle is powered by a reliable engine that delivers impressive torque, making it capable of handling heavy loads and navigating rough terrain with ease. The HUV 4414 boasts a generous cargo capacity, which includes a spacious bed designed to transport tools, equipment, or other materials. This model is equipped with a four-wheel drive system that enhances traction and stability on slippery or uneven surfaces.

Next, the HUV 4214 serves as a versatile option well-suited for light to medium-duty tasks. With its nimble design and responsive steering, it is perfect for tight spaces and maneuverability. The HUV 4214 features a user-friendly dashboard that provides seamless access to essential controls and information, ensuring operators can focus on the task at hand without unnecessary distractions. Its stable frame and suspension system allow for a smooth ride, regardless of the terrain.

Lastly, the HUV 4414-XP is the enhanced version of the HUV 4414, offering additional features tailored for heavier-duty applications. It comes with upgraded suspension for improved stability when carrying maximized loads. The powerful engine in the HUV 4414-XP not only delivers increased acceleration but also maintains efficiency during demanding usage. Enhanced storage options, an extendable cargo bed, and specialized towing capabilities further set this model apart, making it a go-to vehicle for both work and play.

Common characteristics across these models include durable, high-quality materials that ensure longevity and resilience. The vehicles are designed with user comfort in mind, featuring adjustable seats, ample legroom, and easy entry and exit. Safety is paramount, with reinforced frames and secure seatbelts providing added protection for operators and passengers.

In conclusion, the Husqvarna HUV 4414, HUV 4214, and HUV 4414-XP are impressive utility vehicles that cater to the diverse needs of users. Whether for work on a construction site, farming activities, or recreational fun, these models deliver performance, reliability, and versatility. With their strong build, advanced features, and innovative technologies, they stand out in the all-terrain utility vehicle market.
Top Page Image Contents