Genie GS-2632, CE, 82784, GS-2032 manual Safety Rules, Do Not Operate Unless

Page 3

Second Edition • Second Printing

Operator's Manual

 

 

 

 

 

 

Safety Rules

Danger

Failure to obey the instructions and safety rules in this manual will result in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1 Avoid hazardous situations.

Know and understand the safety rules before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the manufacturer's instructions and safety rules— safety and operator's manuals and machine decals

You read, understand and obey employer's safety rules and worksite regulations

You read, understand and obey all applicable governmental regulations

You are properly trained to safely operate the machine.

Part No. 82784

Genie GS-2032 and Genie GS-2632

1

Image 3
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesElectrocution Hazards Tip-over Hazards Maximum allowable manual force GS-2032 Fall Hazards Crushing Hazards Collision HazardsBodily Injury Hazard Component Damage HazardExplosion and Fire Hazard Damaged Machine HazardsLifting Hazard Battery Safety Burn HazardsExplosion Hazards Tip-over HazardPage Ground Control Panel ControlsPlatform Controls Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionCheck the Hydraulic Oil Level MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Batteries Scheduled MaintenanceFunction Tests At the Platform Controls At the Ground ControlsTest the Steering Test the Function Enable SwitchTest Drive and Braking Test Limited Drive SpeedTest the Tilt Sensor Operation Test the Pothole Guards Workplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsOperation From Platform Emergency StopAuxiliary Lowering/Manual Lowering Operation From GroundTo Drive Error Indicator Light OnError Indicator Light Flashing Drive Select SwitchTo Extend and Retract Platform Operation From Ground with ControllerAfter Each Use Battery and Charger Instructions Observe and Obey To Charge BatteryDry Battery Filling Charging Instructions Transport Instructions Brake Release OperationSecuring to Truck or Trailer for Transit Decal Inspection DecalsGround Controls Side Battery Side Model GS-2032 SpecificationsSpecifications Distributed By
Related manuals
Manual 36 pages 5.86 Kb

GS-2632, GS-2032, 82784, CE specifications

The Genie GS series includes several electric scissor lifts, specifically the GS-1530, GS-1532, GS-1932, and GS-1930 models, designed for indoor use in various applications like construction, maintenance, and warehousing. Each model offers a robust set of features and technologies that cater to different working heights and space constraints.

The Genie GS-1530 is compact and ideal for navigating tight spaces, featuring a working height of up to 15 feet and a platform capacity of 500 pounds. It is equipped with non-marking tires, making it suitable for indoor operations without damaging floors. The GS-1530 is lightweight, allowing for easy transport and maneuverability, especially in crowded job sites.

The GS-1532 offers a slightly higher working height of 15 feet, with a larger platform that can accommodate up to 500 pounds. It includes an extension deck feature that provides additional workspace when needed, ensuring operational flexibility. Its narrow width and tight turning radius enhance its usability in constrained environments.

For users needing greater reach, the GS-1930 boasts a working height of up to 19 feet and a platform capacity of 500 pounds. It is designed with advanced battery technology for extended run times, enabling operators to work longer hours without needing a recharge. The GS-1930 can also quickly be transported between job sites or moved within larger facilities due to its compact design.

The GS-1932 further expands the capabilities with a larger platform and similar height of up to 19 feet. It features an innovative control system that allows for easy operation, even in complex settings. With its auto-levelling capabilities, the GS-1932 is equipped to handle uneven ground, making it versatile for various applications.

The CE versions of these models are tailored to meet European standards for safety and performance. They include features such as lowering speed control and emergency stop buttons, ensuring operator safety in various work environments. All models are designed with durability in mind and come with a range of maintenance-friendly features.

In conclusion, the Genie GS series showcases advanced engineering, user-friendly technology, and impressive lifting performance, making them suitable for a wide range of indoor applications. Their compact designs, combined with significant platform capacity, ensure that they meet the demands of modern workplaces. Whether for maintenance tasks or construction projects, the Genie GS models provide reliable solutions tailored to the needs of users.