Cellboost 999-823 Pre-Start Inspection and Operation, Daily Service Checks, Service Cycle Table

Section 3 – Pre-Start Inspection and Operation

DANGER

IMPROPER USE OF THE COMPACT TRENCHER COULD CAUSE SERIOUS INJURY OR DEATH. BEFORE OPERATING THE MACHINE, OR PERFORMING MAINTENANCE, THE OPERATOR MUST READ AND UNDERSTAND THE ENTIRE OPERATOR'S MANUAL, REVIEW MACHINE CONTROLS, LOCATE AND REVIEW ALL WARNINGS AND SAFETY PLACARDS AND RELEVANT OPERATOR SAFETY MATERIALS INCLUDING WRITTEN, VISUAL, VIDEO OR VERBAL INSTRUCTIONS.

Pre-Start Inspection

It is very important to do a visual inspection of the machine before beginning operation. This inspection should include:

•Check all decals and warning signs for damage.

•Check engine oil.

•Check and refill the fuel tank.

•Check hydraulic lines and hoses for signs of damage or leaks.

•Inspect the machine for any signs of damage or loose fasteners.

•Check fluid levels and any signs of leaking fluids.

•Do all Daily Service Checks.

•Check machine controls to make sure that they automatically return to the neutral position. The following information presents details on these inspection points and service checks.

Daily Service Checks

Table 1: Service Cycle Table
Activity	Daily (10 Hours)
Fuel	✓ and R
Engine Oil	✓ and A
Air Filter	✓
Hydraulics
- Hydraulic Fluid	✓
- Hydraulic Hoses	✓
Grease	✓***
Tracks	✓
Check Chain Tension	✓
Visual Check for Loose/Missing Fasteners	✓
Battery
Check and Adjust Track Tension	✓

Service Cycle - R = Replace ✓ = Check A = Add

***Under very wet, muddy, dusty or dirty working conditions more frequent lubrication may be required.

3-1