GENERATOR FEATURES
OIL ALERT SYSTEM
The oil alert system protects the engine from low oil damage. This system auto- matically shuts down the engine and prevents engine restarting if the oil level falls too low.
Note: When this happens, the engine switch remains in the ON position. The oil alert system is wired into the ON/OFF Switch.
If this system shuts down the engine, the engine will not start until you add oil. Add oil to engine (see Engine Oil, page 11).
Note: Operate generator on a level surface. If not level, the oil may flow away from the oil level sensing device. This will cause the oil alert system to shut down engine.
See engine owner’s manual for more information.
|
|
| HONDA |
| ENGINE SW |
|
|
| ON |
|
|
All Models | OFF |
| ON |
Model | OFF START | ||
Except |
|
| |
MGH7000 |
| MGH7000 |
|
|
| Only | ENGINE SW |
|
|
| CIRCUIT |
|
|
| BREAKER |
Figure 2 - Engine Switch Location
FULL POWER SELECTOR SWITCH
All models except MGH3000 and MGH7000 have a full power selector switch on the control panel. The switch has two positions: 120 VOLT ONLY, and 120/240 VOLT.
120 VOLT ONLY: This position sends full power to the 120V receptacles only. 240V power is not available. Use this position when powering 120V items only.
120/240 VOLT: This position sends full power to the 120/240V receptacle. It also powers the 120V receptacles at reduced wattage capacity.
FULL POWER | FULL POWER |
| SELECTOR |
| SELECTOR |
120V | 120 | 120V | 120 |
ONLY | 240V | ONLY | 240V |
120 VOLT ONLY Position | 120/240 VOLT Position |
Figure 3 - Full Power Selector Switch
IMPORTANT: Do not move the full power selector switch while powering electrical items. Unplug all items before moving switch. Failure to do so can damage switch. Model MGH7000 does not have this switch. This model provides full power to all receptacles.
ELECTRIC START (Model MGH7000 Only)
Model MGH7000 has an electric starter. A battery is not supplied with generator. You must provide a
9