Idle Control Trouble Shooting, Not Covered

IDLE CONTROL TROUBLE SHOOTING

PROBLEM

Unit will not idle

Unit idles even with load plugged in

Unit tries to idle but won’t stay latched

POSSIBLE CAUSE

Control panel switch not on

Load plugged into receptacle

Poor connection or faulty cord

Bad I.C. module; Bad electro-magnet or solenoids; Bad stator

Load not heavy enough

Bad I.C. module

Electro-magnet or solenoid position incorrect

Flapper bracket loose or bent

Engine not running smoothly

SOLUTION

Turn to idle on position

Unplug load

Check & repair

Replace

Consult dealer

Turn idle switch to off position

Increase load

Replace

Consult dealer

Reset magnet or solenoid position for 2200 RPM idle speed

Consult dealer

Tighten or straighten

Replace flapper. Readjust to 2200 RPM

Adjust carburetor

Consult dealer

LIMITED WARRANTY

Warranty Coverage: Powermate Corporation (the Company) warrants to the original retail customer in North America that it will repair or replace, free of charge, any parts found by the Company or its authorized service representative to be defective in material or workmanship. This warranty covers the cost of replacement parts and labor for defects in material or workmanship.

Not Covered:

·Transportation charges for sending the product to the Company or its authorized service representative for warranty service, or for shipping repaired or replacement products back to the customer; these charges must be borne by the customer.

·Engine is covered exclusively by a separate warranty from the engine manufacturer, included with the engine Manual.

·Damages caused by abuse or accident, and the effects of corrosion, erosion and normal wear and tear.

·Warranty is voided if the customer fails to install, maintain and operate the product in accordance with the instructions and recommendations of the Company set forth in the owner's manual.

·The Company will not pay for repairs or adjustments to the product, or for any costs or labor, performed without the Company's prior authorization.

Warranty Period: Two (2) years from the date of purchase on products used solely for consumer applications; if a product is used for business or commercial applications, the warranty period will be limited to one (1) year from the date of purchase; if a product is used for rental applications, the warranty period will be limited to ninety (90) days from the date of purchase. For warranty service, the customer must provide dated proof of purchase and must notify the Company within the warranty period.

For warranty service: Call toll free 800-445-1805, or write to Powermate Corporation, Product Services, 4970 Airport Road, P. O. Box 6001, Kearney, NE 68848.

EXCLUSIONS AND LIMITATIONS: THE COMPANY MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. THE WARRANTY SERVICE DESCRIBED ABOVE IS THE EXCLUSIVE REMEDY UNDER THIS WARRANTY; LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES IS EXCLUDED TO THE EXTENT PERMITTED BY LAW.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow a disclaimer of implied warranties, or the exclusion or limitation of incidental and consequential damages, so the above disclaimers and exclusions may not apply to you.


English		3

PM0605000 specifications

The Powermate PM0605000 is a reliable and robust portable generator designed to meet the needs of both residential and commercial users. With a maximum output of 6,000 watts, this generator provides ample power to keep essential appliances and tools running during outages or while on the job.

One of the standout features of the PM0605000 is its powerful 7 HP engine, designed for efficient operation and long-lasting performance. The generator runs on gasoline, making it convenient and widely accessible. The operational fuel tank has a capacity of 4 gallons, allowing for up to 12 hours of continuous use at half load, which is beneficial for extended power outages or job sites requiring sustained energy.

Portability is another key characteristic of the Powermate PM0605000. The generator is equipped with sturdy wheels and a foldable handle, making it easy to transport from one location to another. This design consideration is especially important for users who may need to move the generator frequently, such as contractors or those living in areas prone to power outages.

The PM0605000 comes with a variety of outlets, including multiple 120V AC outlets and a 12V DC outlet for battery charging, catering to diverse power needs. Its circuit breaker protection ensures safety by preventing overload, while the low oil shutdown feature automatically turns off the engine to protect it from damage when oil levels are low.

In terms of noise output, the Powermate PM0605000 operates relatively quietly compared to other generators in its class, making it suitable for residential use without disturbing neighbors. It is designed to meet safety standards with features that minimize risks associated with operation, including a steel frame for durability.

For technology enthusiasts, the PM0605000 integrates simple yet efficient technology that ensures reliability and user-friendliness. The digitally metered control panel provides users with easy access to vital information, including voltage, frequency, and runtime, enhancing operational awareness.

In summary, the Powermate PM0605000 generator stands out for its powerful performance, portability, safety features, and user-friendly design. Whether used for home backup power or on construction sites, it delivers dependable energy solutions in various situations.