Powermate PM0605000 manual Portability KIT Installation, Refer to the parts list on

Page 4

PORTABILITY KIT INSTALLATION

TOOLS REQUIRED: 7/16”, 1/2” and 9/16" sockets and ratchets, block(s) of wood (minimum of 6” tall).

Refer to the parts list on page 9.

WHEEL INSTALLATION

1.Block up end of generator opposite the fuel tank cap to install wheel kit.

2.Insert wheel spacer (item 45) into the center of the wheel (item 31).

3.Slide 3/8 x 4.25” bolt (item 35) and 3/8 washer (item 30) through the wheel (item 31), then through the wheel bracket on the carrier, with the offset side of the wheel hub against the wheel bracket.

4.Thread 3/8 nyloc nut (item 36) onto the bolt and tighten to securely clamp the wheel assembly to the carrier.

5.Repeat above instructions for the remaining wheel.

FOOT INSTALLATION

1.Assemble the rubber feet (item 32) to the foot bracket (item 49) using a 1/4-20 x 1.5” bolt (item 48). Thread a 1/4 washer (item 39) and a 1/4 nyloc nut (item 13) to the bolt to secure the assembly. Caution: Do not over tighten so that the foot material collapses.

2.Blocking up the alternator side of the generator, place the foot bracket under the carrier channel. Thread a 5/16-18 x 1” bolt (item 47) with a 5/16 wide washer (item 34) through the mounting holes and thread a 5/16 wide washer (item 34) and a 5/16 nyloc nut (item 16) to the bolt to secure the foot bracket to the carrier.

HANDLE INSTALLATION

1.Place handle (item 28) and spacer (item 60) over carrier on same end as feet, as shown in the diagram.

2.Slide 5/16 x 2.25” bolt (item 29) and 5/16 washers (item 15) through handle and spacer as shown in diagram and secure with 5/16” nyloc nut (item 16). Tighten until handle is securely clamped to the carrier.

3.Apply aerosol hairspray or similar adhesive to the handle (item 28), and then slide the handle grip (item 46) onto the handle. The aerosol hairspray will allow for easier assembly and will adhere the grip to the handle.

4.Insert cap (item 38) into end of handle (item 28).

5.Repeat above instructions for the remaining handle.

LOCKING HANDLE

1

 

 

 

 

 

 

 

 

 

2

1.

Attach the lanyards (item 33) to the release

 

 

 

 

 

 

 

 

 

 

 

 

pins (item 37) and carrier as shown in the

 

 

 

 

 

 

 

 

 

 

 

 

illustration.

 

 

 

 

 

 

 

 

 

 

 

2.

To lock the handle (item 28) in the extended

 

 

 

 

 

 

 

 

 

 

 

 

position, align the holes in the handle brackets

 

 

 

33

 

 

37

 

 

 

with the holes in the carrier brackets and insert

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the release pins (item 37).

4

 

English

 

 

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PM0605000 Power Cord Connections Major Generator FeaturesControl Panel Limited Warranty Idle Control Trouble ShootingNot Covered Portability KIT Installation Refer to the parts list onCaractéristiques Principales DU Groupe Electrogene Tableau DE CommandeConnexions DU Cordon ’ALIMENTATION Garantie Limitée Dépannage DE LA Commande DU RalentiCe qui nest pas couvert Linstallation DE KIT DE Transport Reportez-vous à la liste des pièces desPanel DE Control Caracteristicas Principales DEL GeneradorConexiones DEL Cable CordKeeper RestricciónDeteccion DE Fallos DE Control EN Vacio No están cubiertosInstalacion DEL Juego DE Transport Parts Drawing / Schema DES Pièces / Diagrama DE Piezas PM0605000Parts List / Liste DES Pièces / Lista DE Piezas Part Description DescripciónParts List / Liste DES Pièces / Lista DE Piezas Page Page Airport Road Box Kearney, NE Fax

PM0605000 specifications

The Powermate PM0605000 is a reliable and robust portable generator designed to meet the needs of both residential and commercial users. With a maximum output of 6,000 watts, this generator provides ample power to keep essential appliances and tools running during outages or while on the job.

One of the standout features of the PM0605000 is its powerful 7 HP engine, designed for efficient operation and long-lasting performance. The generator runs on gasoline, making it convenient and widely accessible. The operational fuel tank has a capacity of 4 gallons, allowing for up to 12 hours of continuous use at half load, which is beneficial for extended power outages or job sites requiring sustained energy.

Portability is another key characteristic of the Powermate PM0605000. The generator is equipped with sturdy wheels and a foldable handle, making it easy to transport from one location to another. This design consideration is especially important for users who may need to move the generator frequently, such as contractors or those living in areas prone to power outages.

The PM0605000 comes with a variety of outlets, including multiple 120V AC outlets and a 12V DC outlet for battery charging, catering to diverse power needs. Its circuit breaker protection ensures safety by preventing overload, while the low oil shutdown feature automatically turns off the engine to protect it from damage when oil levels are low.

In terms of noise output, the Powermate PM0605000 operates relatively quietly compared to other generators in its class, making it suitable for residential use without disturbing neighbors. It is designed to meet safety standards with features that minimize risks associated with operation, including a steel frame for durability.

For technology enthusiasts, the PM0605000 integrates simple yet efficient technology that ensures reliability and user-friendliness. The digitally metered control panel provides users with easy access to vital information, including voltage, frequency, and runtime, enhancing operational awareness.

In summary, the Powermate PM0605000 generator stands out for its powerful performance, portability, safety features, and user-friendly design. Whether used for home backup power or on construction sites, it delivers dependable energy solutions in various situations.
Top Page Image Contents