Receptacles, Connecting Electrical Loads

Generac 1654-0 owner manual Receptacles, Connecting Electrical Loads, Stopping the Engine

5500 Watt Heavy Duty Generator

Connecting Electrical Loads

•Let engine stabilize and warm up for a few minutes after starting.

•Plug in and turn on the desired 120 and/or 240 Volt AC, single phase, 60 Hz electrical loads.

•Do Not connect 240 Volt loads to the 120 Volt duplex receptacles.

•Do Not connect 3–phase loads to the generator.

•Do Not connect 50 Hz loads to the generator.

•DO NOT OVERLOAD THE GENERATOR. See “Don’t Overload the Generator” on page 9.

Stopping the Engine

•Unplug all electrical loads from generator panel receptacles. Never start or stop engine with electrical devices plugged in and turned ON.

•Let engine run at no-load for several minutes to stabilize the internal temperatures of engine and generator.

•Move rocker switch to “Off” position.

•Move the fuel valve to the “Off” position.

RECEPTACLES

120/240 Volt AC, 30 Amp, Locking Receptacle

Use a NEMA L14–30 plug with this receptacle. Connect a 4–wire cord set rated for 250 Volt AC loads at 30 Amps (or greater) (Figure 7).You can use the same 4–wire cord if you plan to run a 120 Volt load.

This receptacle powers 120/240 Volt AC, 60 Hz, single phase loads requiring up to 5,500 watts of power (5.5 kW) at 30 Amps for 120 Volts or 240 Volts.The outlet is protected by a push–to–reset circuit breaker.

CAUTION! Although this outlet states it has a 120/240 Volt 30 Amp rating (up to 7,200 watts), the generator is only rated for 5,500 watts. Powering loads that exceed the wattage/amperage capacity of the generator can damage it or cause serious injuries.

Figure 7 — 120/240 Volt AC, 30 Amp Receptacle

4-Wire Cord Set

240V

120V 120V

W (Neutral)

Y (Hot)	X (Hot)
NEMA L14-30	Ground (Green)

120 Volt AC, 20 Amp, Duplex Receptacles

Each duplex receptacle (Figure 8) is protected against overload by a push–to–reset circuit breaker.

Figure 8 — 120 Volt, 20 Amp Duplex Receptacle

Use each receptacle to operate 120 Volt AC, single–phase, 60 Hz electrical loads requiring up to 2,400 watts (2.4 kW) at 20 Amps of current. Use cord sets that are rated for 125 Volt AC loads at 20 Amps (or greater).

CAUTION! These outlets are rated at 120 Volt 20 Amp each (up to 80 Amps).The generator is only rated for up to 45.8 Amps. Powering loads that exceed the wattage/amperage capacity of the generator can damage it or cause serious injuries.

1654-0 specifications

The Generac 1654-0 is a high-performance portable generator designed for reliable power supply during outages, outdoor activities, or construction projects. One of its standout features is its robust engine, which provides ample wattage to run essential appliances and tools. With a starting wattage of around 16,000 watts and continual power of approximately 15,000 watts, the Generac 1654-0 can effortlessly support larger devices, including refrigerators, air conditioners, and power tools.

A defining characteristic of the 1654-0 is its advanced Generac OHV engine, which is built for durability and efficiency. This horizontal shaft engine features a durable design that offers consistent performance over time, ensuring you won't be left without power when you need it most. The generator is also designed with a heavy-duty steel frame, providing added stability and protection.

The Generac 1654-0 is equipped with a large-capacity fuel tank that can hold around 10 gallons of gasoline. This generous fuel capacity allows for extended run times, making it perfect for long events or power outages. Additionally, a fuel gauge is incorporated, allowing users to monitor fuel levels easily.

One of the key technologies used in the 1654-0 is its True Power Technology, which provides clean and stable energy. This technology is crucial for sensitive electronic devices as it minimizes harmonic distortion to less than 5%, protecting your equipment from potential damage.

Convenience features are also abundant in the Generac 1654-0. The generator includes multiple outlets, offering a variety of connection options for different devices. There are also circuit breakers for added protection, ensuring safe operation.

The unit is designed with user-friendly controls and an easy-to-read LCD display that shows runtime hours, wattage used, and maintenance alerts. These features make it simple to manage and monitor the generator.

Another notable aspect is the generator’s portability. With sturdy wheels and a fold-down handle, it can be easily maneuvered to wherever you need power. Coupled with a lightweight design, the Generac 1654-0 addresses both performance and portability, making it an excellent choice for a variety of power needs. Whether for emergency backup or recreational use, the Generac 1654-0 stands out as a reliable and efficient solution.