Energy Tech Laboratories VEC1029FPOB Using the 120 Volt AC Power Supply, Power Center comes with

Page 8

VEC1029FPOB_ManualEN_101606 10/16/06 5:17 PM Page 7

USING THE 120 VOLT AC POWER SUPPLY

The

Power Center comes with:

 

1.

AC On/Off Switch — Press switch to turn the AC Power

 

AC POWER

 

Supply on and off.

SUPPLY PANEL

2.Dual 120 Volt AC Power Outlets.

3.AC Power Supply “ON” Status Indicator (green LED) — lights when AC outlet is turned on; green LED flashes on and off when faulted.

4.AC Power Ground Fault Circuit Interrupt (GFCI) — two

three-prong outlets for 110/120 volt AC appliances which shut down inverter if leakage or ground fault current is detected.

5.Internal protective circuits including:

•Overload and over-temperature shutdown (activated if AC output exceeds 400 watts or the unit overheats)

•AC short-circuit shutdown

•Low voltage shutdown

•A new cooling technology that more efficiently cools the power transistors, dramatically increasing reliability and product life.

AC Power Supply Controls, Indicators and Operation

The illustration above details the AC Power Supply Panel. The ON/OFF switch turns the AC power circuitry ON and OFF. It can also be used to reset AC power after shutdown due to overvoltage, overload or over-temperature condition. The “ON” status indicator lights when AC power supply is available.

1.Turn power switch to ON (the power indicator lights).

2.Plug in appliance and operate as usual.

Make sure the 120 Volt AC Power Supply switch is in the OFF position when the unit is being recharged or stored.

Note: The AC power supply shuts down automatically when the battery voltage level is too low. If the green LED flashes, a faulty condition such as an overload, overheating or short circuiting has occurred. Turn the AC Power Supply OFF and unplug the appliance. Wait a few minutes, then turn power back ON.

USING THE USB CHARGING PORT

Both the USB Charging Port and its ON/OFF Pushbutton are located on the unit’s Front Panel (see page 5).

1.Press the USB Charging Port ON/OFF Pushbutton to turn the USB Port ON. The red USB Power LED will light.

2.Lift the rubber cover to access the USB Charging Port (on the Front Panel).

3.Plug the USB-powered device into the USB Power Port and operate normally.

4.Press the ON/OFF Pushbutton again to turn the USB Charging Port OFF when you are finished.

Notes: This unit’s USB Charging Port does NOT support data communication. It only provides 5 volts/500mA DC maximum power to an external USB-powered device.

To conserve battery power, ALWAYS turn the USB Charging Port OFF when not in use.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Power Center Weather Radio Safety Instructions Read This User’s Manual Before Using This Unit Table of Contents Back View Protective FeaturesFront View Viewing Battery Charge Status AC and DC CHARGING/RECHARGINGUnit Front Panel LEDs from right to leftUsing the 12 Volt DC Portable Power Supply Volt DC ChargingUsing the 120 Volt AC Power Supply Using the USB Charging PortAC Power Supply Controls, Indicators and Operation Power Center comes withProgramming the Clock Alarm Clock Using the Emergency Area LightUsing the CLOCK/ALARM Clock Using the Radio Using the Sleep FeatureUsing the Weather Radio Alert Feature To Access User-Programmed StationsNoaa Weather Radio NWR ALL Hazards Replacement Parts Using the Detachable HAND-CRANK LED FlashlightCare and Maintenance Specifications Fuse Replacement 12 Volt DC Charging/Power AdapterBattery Replacement/Disposal Volt DC SpecificationsVEC1029FPOBManualEN101606 10/16/06 517 PM VEC1029FPOBManualEN101606 10/16/06 517 PM TWO Year Limited Warranty Program

VEC1029FPOB specifications

Energy Tech Laboratories has taken a significant leap in renewable energy solutions with the introduction of the VEC1029FPOB, a cutting-edge power optimization device designed for a range of applications from residential to commercial energy systems. This innovative technology focuses on maximizing efficiency and harnessing renewable energy sources, thus positioning itself at the forefront of the energy tech landscape.

The VEC1029FPOB boasts several key features that set it apart from traditional energy devices. One of its main characteristics is its sophisticated energy management system, which integrates seamlessly with solar panels, wind turbines, and various energy storage solutions. Users can monitor and manage their energy consumption in real-time, ensuring optimal performance and reduced energy costs.

At the heart of the VEC1029FPOB is its advanced adaptive load management technology. This allows the device to automatically adjust power distribution according to demand, effectively preventing energy wastage. By intelligently allocating energy where it's needed most, the VEC1029FPOB not only enhances efficiency but also extends the lifespan of connected devices and appliances.

Another remarkable feature of the VEC1029FPOB is its ability to operate in off-grid situations. Equipped with a robust energy storage solution, this device can store excess energy generated by renewable sources for later use. Whether in urban settings or remote locations, users can rely on the VEC1029FPOB for a consistent and autonomous power supply.

Moreover, the VEC1029FPOB is designed with user convenience in mind. Its intuitive interface and mobile app integration allow for easy configuration and monitoring from anywhere. This user-centric approach ensures that both tech-savvy individuals and those new to energy management can utilize its features without difficulty.

The VEC1029FPOB’s commitment to sustainability is evident not only in its operational capabilities but also in its environmentally friendly design. Built with recyclable materials and following strict energy-efficient guidelines, this device reflects Energy Tech Laboratories' dedication to promoting sustainable practices.

In summary, the Energy Tech Laboratories VEC1029FPOB stands out as a versatile power optimization solution that combines innovation, efficiency, and user-friendliness. With its advanced features, including adaptive load management, off-grid capabilities, and a focus on sustainability, the VEC1029FPOB is poised to revolutionize the way we approach energy management in our homes and businesses.
Top Page Image Contents