Crown Audio 1160A, 180A, 280A specification

180A

280A

1160A

280A back panel. 180A and 1160A are similar except for the number of channels.

Line Out Connector: One 3-pin balanced Phoenix- type connector per output channel. Post master, pre-VCA. Level controlled by master volume control.

Amp Input Connector:

3-pin Phoenix-type, high-impedance balanced, one per amplifer channel.

Cooling

Convection cooled.

Protection

Current Limit Protection: Included.

Thermal Limit Protection: Over-temperature thermal cutout.

DC-Fault Load Protection: Included.

Included Accessories

Power cord Detachable rack ears Screws for rack ears

Non-touch cover for output connectors Phoenix-type connectors

Spade lugs

Optional Accessories

1-VCAP remote volume control for one channel.

4-VCAP remote volume control for four channels.

Dimensions

EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B) with rack ears, 3.5-inch (8.9-cm) height and 12.2-inch (31.0-cm) depth behind the mounting surface (not including non-touch cover).

4.1inches (10.5 cm) high including feet. 13.9 inches (35.2 cm) deep from front of knobs to back of non-touch cover.

Weight

Net Weight:

180A: 21.0 lb (9.5 kg)

280A: 25.3 lb (11.5 kg)

1160A: 25.3 lb (11.5 kg)

Shipping Weight:

180A: 26.0 lb (11.8 kg)

280A: 30.3 lb (13.7 kg)

1160A: 30.3 lb (13.7 kg)

Crown’s Three-Year, No-Fault, Fully Transferable Warranty

Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown ampliﬁer-—an unsurpassed industry standard. With this unprecedented No-Fault protection, your new Crown ampliﬁer is warranted to meet or exceed original speciﬁcations for the ﬁrst three years of ownership. During this time, if your ampliﬁer fails, or does not perform to original speciﬁcations, it will be repaired or replaced at our expense. About the only things not covered by this warranty are those losses normally covered by insurance and those caused by intentional abuse. And the coverage is transferable, should you sell your ampliﬁer.

See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributor for warranty information or call 574-294-8200.

Crown International 1718 W. Mishawaka Rd. Elkhart, IN 46517-9439 TEL: 574-294-8200 FAX: 574-294-8FAX www.crownaudio.com

Speciﬁcations subject to change without prior notice. Latest information available at www.crownaudio.com.

Crown and Crown Audio are registered trademarks of Crown International. Other trademarks are the property of their respective owners. Printed in U.S.A.

9/07	138118-2A