Baldor PC32RI, PC43RI manual Section General Information, Limited Warranty

Page 11

Section 2

General Information

Thank you for purchasing your Baldor Generator Set. This manual contains information you need to safely and efficiently install and operate your generator set. During the preparation of this manual every effort was made to ensure the accuracy of its contents. This manual describes only very basic engine information. A separate owner’s manual for the engine is supplied with this unit for your use. Please refer to the engine manual for information relative to engine operation, maintenance, recommendations and additional safety warnings.

Copyright Baldor ♥ 2004. All rights reserved.

This manual is copyrighted and all rights are reserved. This document may not, in whole or in part, be copied or reproduced in any form without the prior written consent of Baldor Electric Company, Inc.

Baldor Generators have earned the reputation of being high quality and dependable. We take pride in this fact and continue to keep our quality standards high on our list of priorities. We are also constantly researching new technological ideas to determine if they could be used to make our generator sets even better.

Baldor makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of fitness for any particular purpose. The information in this document is subject to change without notice. Baldor assumes no responsibility for any errors that may appear in this document.

Limited Warranty

Baldor Generators will replace or repair free of charge any part or parts of the generator of their manufacture that are defective in workmanship and materials for a period of time as set forth in the Warranty Period chart below. All Baldor products requiring warranty service shall be transported or shipped freight pre−paid, at the risk of the party requiring warranty service, to a Baldor Generator repair facility, or to Baldor Generators − Customer Service Department in Oshkosh, Wisconsin. Written notification of the alleged defect in addition to a description of the manner in which the Baldor generator is used, and the name, address and telephone number of the party requiring warranty service must be included. Baldor is not responsible for removal and shipment of the Baldor product to the service center or for the reinstallation of the Baldor product upon its return to the party requiring warranty service. Problems with Baldor products can be due to improper maintenance, faulty installation, non−Baldor additions or modifications, or other problems not due to defects in Baldor workmanship or materials. If a Baldor Generator repair facility determines that the problem with a Baldor product is not due to defects in Baldor workmanship or materials, then the party requesting warranty service will be responsible for the cost of any necessary repairs.

EXCEPT FOR THE EXPRESSED WARRANTY SET FORTH ABOVE, BALDOR GENERATORS DISCLAIMS ALL OTHER EXPRESSED AND IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. NO OTHER WARRANTY, EXPRESSED OR IMPLIED, WHETHER OR NOT SIMILAR IN NATURE TO ANY OTHER WARRANTY PROVIDED HEREIN, SHALL EXIST WITH RESPECT TO THE GOODS SOLD UNDER THE PROVISIONS OF THESE TERMS AND CONDITIONS. ALL OTHER SUCH WARRANTIES ARE HEREBY EXPRESSLY WAIVED BY THE BUYER. UNDER NO CIRCUMSTANCES SHALL BALDOR GENERATORS BE LIABLE OR RESPONSIBLE IN ANY MANNER WHATSOEVER FOR ANY INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR ANTICIPATED PROFITS RESULTING FROM THE DEFECT, REMOVAL, REINSTALLATION, SHIPMENT OR OTHERWISE. This is the sole warranty of Baldor Generators and no other affirmations or promises made by Baldor Generators shall be deemed to create an expressed or implied warranty. Baldor Generators has not authorized anyone to make any representations or warranties other than the warranty contained herein.

Warranty Period

 

 

 

 

 

Generator Series

Labor*

Parts

Portable Products

1 Year

3 Years

(Premier, Powerchief, DG Series, K Series)

 

 

Towable Products (TS)

1 Year or 3,000 Hours

3 Years or 3,000 Hours

 

Whichever comes first

Whichever comes first

 

 

 

3600 RPM Standby Systems

1 Year or 1,000 Hours

3 Years or 1,000 Hours

(Some AE Models)

Whichever comes first

Whichever comes first

 

 

 

1800 RPM Standby Systems

1 Year or 3,000 Hours

3 Years or 3,000 Hours

(Some AE Models, DLC, GLC)

Whichever comes first

Whichever comes first

 

 

 

Industrial Standby Systems

1 Year or 1,000 Hours

2 Years or 1,000 Hours

 

Whichever comes first

Whichever comes first

 

 

 

Industrial Prime Power Systems

1 Year or 1,000 Hours

1 Year or 1,000 Hours

 

Whichever comes first

Whichever comes first

 

 

 

International

1 Year or 1,000 Hours

1 Year or 1,000 Hours

 

Whichever comes first

Whichever comes first

*For products covered under labor coverage, travel expenses will be allowed up to 7 hours straight labor or 300 miles, whichever occurs first and only applies to permanently wired and mounted products (AE, DLC, GLC, IDLC). No warranty registration card is necessary to obtain warranty on Baldor Generators.

You must save the purchase receipt. Proof of purchase, date, serial number and model number will be required for all portable and Towable products to qualify for any warranty consideration.

For all other products, a start−up inspection form/warranty registration must be completed in its entirety and submitted to Baldor Generators within 30 days of start−up to qualify for any warranty consideration.

MN2403

General Information 2-1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PC32Ri and PC43Ri Portable Generator California Proposition 65 Warning Table of Contents Ii Table of Contents MN2403 Read This Manual Thoroughly Section Product Safety InformationOperation SymbolsOperation Warning Statements Burn Installation Maintenance Product Safety Information MN2403 Section General Information Limited WarrantyWarranty Period Generator Series Labor Parts General Information MN2403 Storage Section Receiving & InstallationPhysical Location Frame Ground Connection Engine Oil Frame Ground ConnectionPage Use of Electric Motor Loads Recommended Engine Oil and Battery TypeVoltage Drop in Electrical Extension Cords Voltage Drop in Extension CordsSection Operation DC Output Operator Control Panel ~ AC OutputShown With Left Cover Removed Connection Diagram SE or higher grade SAE 10W−30 or SAE 10W−40 Left side cover Section Troubleshooting and MaintenanceCheck Air Cleaner Left side cover Check Fuel Level Check Oil LevelPeriodic Maintenance Schedule Clean/Adjust Spark Plug Left side coverClean Spark Arrester CleaningTroubleshooting Guide Problems and SolutionsEngine Oil SE or higher grade SAE 10W−30 or SAE 10W−40 ServiceBaldor District Offices California Proposition 65 Warning

PC32RI, PC43RI specifications

The Baldor PC32RI and PC43RI are a pair of robust and efficient industrial motors designed for demanding applications, particularly in the food and beverage industry, packaging, and other heavy-duty sectors. These motors are known for their reliability and high performance, making them ideal for environments that require continuous operation.

One of the main features of the Baldor PC32RI and PC43RI is their high efficiency. These motors are designed to meet or exceed the efficiency standards set by the National Electrical Manufacturers Association (NEMA). This efficiency translates to reduced energy consumption, which not only lowers operating costs but also contributes to a smaller carbon footprint. The motors are engineered to optimize performance while minimizing heat generation, enhancing their longevity and reducing maintenance needs.

Another significant characteristic of these motors is their advanced design, which incorporates innovative technologies. The PC32RI and PC43RI feature robust construction with high-quality materials that ensure durability and reliability under harsh conditions. They include an adjustable base, allowing for flexible mounting options, which is crucial for various installation needs. The motors also come with sealed bearings, enhancing their reliability by preventing contamination from dust and moisture in industrial settings.

The Baldor PC32RI and PC43RI motors also employ electronic controls that provide precision in operation. These controls allow for variable speed functionality, which is essential for applications requiring precise torque and speed adjustments. This flexibility is particularly beneficial in processes where load conditions frequently change. Furthermore, the integration of built-in safety features, such as over-temperature and overload protection, ensures that the motors operate within safe parameters, prolonging their service life and safeguarding connected equipment.

In addition to these technological advancements, the Baldor PC32RI and PC43RI are also designed to be user-friendly. The motors come with comprehensive documentation and support, making installation and troubleshooting straightforward for operators. Their compact design allows for easy integration into existing systems without requiring extensive modifications.

Overall, the Baldor PC32RI and PC43RI stand out in the market due to their combination of efficiency, durability, and advanced technology. These motors are perfect for businesses seeking reliable solutions to enhance their productivity and reduce operational costs. With a strong emphasis on innovation and performance, Baldor continues to set a standard in the industrial motor industry.
Top Page Image Contents