Starting the Generator

STOP!

Before starting this generator, confirm that all the steps in the section titled, “Preparing the Generator for Use,” of this manual have been correctly completed. If unsure about how to perform any of these steps, call 1-866-460-9436, Monday - Friday, 8 AM - 4 PM Central Time for customer service.

Disconnect all electrical loads from this generator before attempting to start.

To start this generator:

1.Confirm that there are no electrical devices connected to this generator. Connected devices may increase the difficulty in starting the engine.

2.Confirm that this generator is properly grounded. (See “Ground the Generator” section of this manual.)

3.Turn the fuel valve to the “on” position.

4.Move the choke lever to the “closed” position.

5.Set the engine switch to the “on” position.

6.Slowly pull on the recoil starter handle, shown in Figure 4, until a slight resistance is felt. Then pull briskly to start the engine. Gently return the cord into the generator to avoid damage to the starter or housing. Never allow the cord to snap back.

7.If the engine fails to start, repeat step 6. NOTE: After repeated attempts to start the engine, consult the troubleshooting guide before attempting again. If problems persist, call 1-866-460-9436, Monday - Friday, 8 AM - 4 PM Central Time.

8.Once the engine has started and runs for about a minute, move the choke lever approximately half way towards the “open” position. Wait an additional 30 seconds and then move the choke lever completely over to the “open” position.

9.Allow this generator to run for several minutes before connecting any electrical devices.

Figure 4

The Recoil Start is located on the back side of the generator.

GEN1850 1850 Surge Watts Portable Generator

GEN1850 specifications

The Buffalo Tools GEN1850 is a versatile and robust industrial-grade generator designed to cater to the demanding power needs of various applications. With a user-friendly design and advanced technology, this generator stands out in the competitive landscape, making it a preferred choice for both professionals and DIY enthusiasts.

One of the standout features of the GEN1850 is its powerful 6.5 HP engine, capable of delivering a maximum output of 1850 watts. This reliable engine ensures that users can run essential appliances, tools, and equipment without interruption, making it ideal for construction sites, outdoor events, and emergency back-up power at home. The generator is equipped with a 4-gallon fuel tank, providing an impressive run time of up to 10 hours at half load, thereby minimizing the need for frequent refueling during use.

The GEN1850 is designed with portability in mind. It features sturdy wheels and a foldable handle, allowing users to easily transport the generator from one location to another. This design consideration makes it an excellent companion for outdoor activities such as camping, tailgating, and RV trips, where power is often required away from conventional outlets.

Safety is a top priority in the design of the GEN1850. It comes fitted with a low oil shutdown feature, which automatically halts the engine's operation when oil levels drop below a safe threshold. This not only protects the engine from damage but also prolongs its lifespan, ensuring that users get the most out of their investment.

The generator also features multiple outlet types, including standard 120V household outlets, which allow for versatility in power supply. Whether powering tools, lights, or kitchen appliances, users have the flexibility they need for various situations.

Moreover, the GEN1850 operates with a sound level that is remarkably quiet for a generator of its size, making it suitable for use in residential areas and during events where noise pollution is a concern. The combination of these features culminates in a generator that is not only powerful and portable but also user-friendly and safe, making the Buffalo Tools GEN1850 an excellent choice for anyone in need of reliable power on the go.