Electrical Precautions:
1.All connections and conduits from the Generator to the load must only be installed by trained and licensed electricians, and in compliance with all relevant local, state, and federal electrical codes and standards, and other regulations where applicable.
2.The Generator must be properly
3.If an extension cord (not included) is used, make sure to use only UL® approved cords having the correct gauge and length. (See Figure A.)
FIGURE A
REQUIRED MINIMUM EXTENSION CORD GAUGE – 120/ 240 VOLT
NAMEPLATE |
| EXTENSION CORD LENGTH |
| |||
AMPERES |
|
|
|
|
| |
(At Full Load) |
|
|
|
|
| |
|
| 0 - 25 | 25 - 50 | 50 | 100 – 150 | 150– 200 |
|
| Feet | Feet | Feet | Feet | Feet |
0 - 5 | 16 | 16 | 16 | 12 | 12 | |
5.1 | - 8 | 16 | 16 | 14 | 10 | - |
8.1 - 12 | 14 | 14 | 12 | - | - | |
12.1 | - 15 | 12 | 12 | 10 | - | - |
15.1 | - 20 | 10 | 10 | 10 | - | - |
SKU 90236 | For technical questions, please call | Page 10 |