To Start The Generator:
1.Turn the Fuel Valve (31) to its vertical “OPEN” position.
(See Figure E.)
2.Move the Engine’s Fuel Choke all the way to the right to its “START” posi- tion. (See Figure E.)
3.Turn the Engine’s “ON/OFF” Switch
(46) to its “ON” position
(See Figure F.)
4.Grasp the Handle of the Engine’s Starter Pulley and rapidly pull the Starter Pulley to start the Engine. NOTE: It may take more than one pull on the Starter Pulley to start the En- gine.
5.Allow the Engine to run for several seconds, then move the Engine’s Fuel Choke all the way to the left to its “RUN” position. (See Figure E.)
NOTE: DO NOT ATTEMPT TO ADJUST THE ENGINE’S THROTTLE! This engine uses a governor device to automatically control the engine’s speed. If the throttle is adjusted, it may result in decreased efficiency and/or damage to the unit.
CHOKE
FUEL VALVE (31)
Hidden from view
FIGURE E
ON/OFF
Switch
FIGURE F
OVERLOAD BREAKERS | 120V DUAL OUTLET | 120/240 V |
| |
TWISTLOCK OUTLET | GROUNDING POINT | |||
(42) | (43) | |||
(44) |
| |||
|
|
| ||
FIGURE G |
|
|
| |
|
|
|
| |
|
|
| REV 06/04; 11/04 |
SKU 90236 | For technical questions, please call | Page 14 |