Craftsman 580.327071 owner manual Know Your Generator, Rlter

ENGINE RUN/STOP SWITCH --Must be set to RUN to start the engine Set switch to STOP to stop the engine

120 VOLTS "DUPLEX" RECEPTACLES -- May be used to suppIy electrical power for the operation of 120 voits at 20 amps AC, single phase, 60 Hz, AC electrical lighting, appliance, tool and motor loads

120 VOLTS, 30 AMP RECEPTACLE -- May be used to supply electrical power for the operation of 120 volts at 30 amps AC, single phase, 60 Hz, AC electrical lighting, appliance, tooi and motor ioads Twistlock connectors are required when using this receptacle

120 VOLTS, 20 AMP RECEPTACLE -- May be used to supply electrical power for the operation of 120 volts at 20 amps AC, single phase, 60 Hz, AC electrical lighting, appliance, tool and motor loads Twistlock connectors are required when using this receptacle

120/240 VOLTS RECEPTACLE -- May be used to supply electrical power for the operation of up to 240 volts at 30 amps AC, single phase, 60 Hz, AC electrical lighting, appliance, tool and motor loads Twist]ock connectors are required when using this receptacle

AC CIRCUIT BREAKERS -- Protects the generator against electrical ovedoad Breakers are "push to reset" type for 15-amp, 20-amp and 30-amp loads.

SPARK ARRESTOR MUFFLER -- Exhaust muffter has a spark arrestor screen

240 VOLTS, 50 AMP RECEPTACLE -- May be used to supply electrical power for the operation of up to 240 volts at 50 amps AC, single phase, 60 Hz, AC electrical lighting, appliance, tool and motor loads Range connectors are required when using this receptacle

FUEL LEVEL GAUGE - Indicates level of fuel in fuel tank