GENERATOR COMPONENTS
Observe the locations and functions of the various components and controls of this generator.
(1)120/240 Volt AC Outlet - Used for connecting electrical devices that run on 120 and/or 240 Volt, 60 Hz, single phase, AC current.
(2)Ground Terminal - Used for connecting grounding wires to properly ground this generator.
(3)120 Volt AC Outlet - Used for connecting electrical devices that run on 120 Volt, 60 Hz, single phase, AC current.
(4)Voltage Selector - Used to select between 120 or 240 Volt output.
(5)Circuit Breaker- Reset switch that protects this generator from electrical overload.
(6)12 Volt DC Outlet - Only used for charging 12 Volt automotive- type batteries.
(7)Oil Filler/Dipstick Cap - Location for checking and filling the engine crankcase oil.
(8)Key Ignition
(9)Recoil Starter -
(10)Fuel Filter Cup - Traps dirt and water from the fuel prior to entering the engine.
(11)Fuel Valve - Allows gasoline to pass into the engine.
(12)Air Filter - A removable, cleanable,
(13)Choke Lever - Adjusts the amount of air allowed into the engine.
(14)Fuel Gauge - Indicates the amount of gasoline remaining in the fuel tank.
(15)Fuel Tank Cap - Access to the fuel tank for adding gasoline.
(16)Volt Meter - A gauge indicating the voltage output.
(17)Digital Hour Meter
(18) Muffler - Reduces the engine noise level. | (19) Spark Plug - Provides ignition to the engine. |
Model | 10 |