Poulan 96192001801, 415244 owner manual Table of Contents

Page 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impel- ler and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the engine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16. Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufac- tured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECAL ATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

4.0 Quarts

and Type:

 

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

21 Ounces (0,6 Liters)

 

 

Spark Plug:

Champion RJ19LM

Gap:

0.030" (0,762 mm)

 

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

ASSEMBLY / PRE-OPERATION

4-6

OPERATION

7-12

MAINTENANCE

13-14

MAINTENANCE SCHEDULE

13

SERVICE AND ADJUSTMENTS

15-17

STORAGE

17

TROUBLESHOOTING

18

REPAIR PARTS

20-31

3 WARRANTY

32

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for startingDischarge chute control lever used to change the di Stopping HOW to USE Your Snow ThrowerUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Engine CleaningService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Other StorageTroubleshooting Service Notes 1958 405972X479 405973X479Page 414280 Knob, Lever Repair Parts Snow Thrower Model PP10530ES Handles 17060410 Repair Parts Drive Repair Parts Snow Thrower Model PP10530ES Drive Page 35062 KEY Part DescriptionRepair Parts Wheels / Decals 415244 415245 Wheels / DecalsLimited Warranty

96192001801, 415244 specifications

The Poulan 96192001801,415244 is a noteworthy option in the realm of outdoor power equipment, specifically designed for lawn care enthusiasts and professionals alike. This product stands out for its robust features, innovative technologies, and user-friendly characteristics that enhance lawn maintenance experiences.

One of the main features of the Poulan 96192001801,415244 is its powerful engine. Equipped with a reliable two-cycle engine design, it delivers robust performance, ensuring that users can tackle various lawn care tasks with ease. The engine provides sufficient power for trimming, edging, and even light landscaping, making it a versatile tool for yard maintenance.

The lightweight design of this product significantly enhances user comfort and maneuverability. Weighing in at a manageable level, the trimmer allows for extended use without causing undue strain on the user. This aspect is particularly beneficial for homeowners who may need to spend several hours working on their lawns or for professionals who require efficiency and ease of use.

Additionally, the Poulan 96192001801,415244 features an adjustable cutting width, allowing users to customize the trimmer’s performance based on specific needs. This flexibility not only increases efficiency but also saves time, as users can switch between different tasks without the hassle of changing equipment.

An important characteristic of this model is its ease of starting mechanism. The inclusion of an easy-start system minimizes the effort needed to get the trimmer up and running, thus reducing frustration, especially on busy days when tackling multiple gardening tasks. This feature is particularly appreciated by novice users who may lack extensive experience with outdoor power equipment.

The Poulan 96192001801,415244 also incorporates a straightforward line feed system, which ensures that users can quickly and efficiently replace the cutting line when needed, minimizing downtime during yard work. This design consideration makes it an excellent choice for those who prioritize efficiency and convenience.

In summary, the Poulan 96192001801,415244 combines power, versatility, and user-friendly features, positioning it as a top-tier option for anyone looking to maintain their outdoor spaces effectively. Whether for residential use or professional landscaping, this trimmer provides the functionality and reliability needed for successful lawn care endeavors.
Top Page Image Contents