Replacing the Shave Plate

	Idler Bracket	Engine
	Idler Bracket	Pulley
Auger Pulley	Drive Belt
Auger Pulley

Figure 5

•Carefully release the idler bracket and allow it to pivot downward.

•Carefully slip the drive belt off the auger pulley, freeing it from the snow thrower. See Figure 5.

•Install the replacement drive belt by following the preceding steps in reverse order.

•Reattach the belt cover with the five hex screws removed earlier.

The shave plate is subject to wear and should be checked periodically. There are two wearing edges and the shave plate can be reversed after one side wears out.

To replace (or reverse) the shave plate, proceed as follows:

NOTE: Call 1-800-800-7310 for information regarding price and availability of Shave Plate Kit 753-0451 or contact an authorized MTD Service Dealer in your area.

•Remove the four carriage bolts and hex lock nuts which secure it to the snow thrower’s auger housing. Refer to Figure 4.Figure 4

•Install the new shave plate (or reverse the existing one, if both sides are not yet worn), making sure the heads of the carriage bolts are on the inside of the housing. The lock nuts should be on the outside of the housing.

•Adjust the shave plate as instructed in the Making Adjustments section on page 8 of this manual.

•Tighten the nuts securely before operating the snow thrower.

Replacing the Auger’s Rubber Paddles

The snow thrower auger’s rubber paddles are subject to wear and should be replaced if any signs of excessive wear is present.

NOTE: Call 1-800-800-7310 for information regarding the price and availability of Auger Kit 753-04472or contact an authorized MTD Service Dealer in your area).

To change the rubber paddles, proceed as follows:

•Remove the existing rubber paddles by unthreading the self-tapping screws which secure them to the auger.

•Secure the replacement rubber paddles to the auger using the hardware removed earlier.

SECTION 7: OFF-SEASON STORAGE

WARNING: Never store engine with fuel in tank indoors or in enclosed, poorly ventilated areas where fuel fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer, or other gas appliance.

•Clean snow thrower thoroughly.

•Lubricate as instructed in the Maintaining Your Snow Thrower section on page 8 of this manual.

•Refer to the Engines manual packed with the snow thrower for detailed instructions regarding all engine-related storage instructions.

•Store the snow thrower in a clean, dry area.

•Place blocks under the front of the auger housing so that the snow thrower is not resting on the rubber auger paddles. The rubber can become misshaped if it supports the weight of the snow thrower for several months of storage.

NOTE: When storing any type of power equipment in a poorly ventilated or metal storage shed, care should be taken to rustproof the equipment, especially springs, cables and all moving parts.

262, S265 specifications

The MTD S265 and S262 are part of MTD's renowned line of outdoor power equipment, designed with the user in mind while maintaining superior performance for lawn care and maintenance tasks. These two models combine robust features and innovative technologies to cater to both amateur and professional users.

One of the standout features of the MTD S265 and S262 is their powerful engines. Both models are equipped with reliable, high-torque engines that deliver ample power for efficient cutting and mowing. The engines are designed for easy starting, ensuring that users can get to work without any hassle. Additionally, they are engineered for fuel efficiency, providing extended runtime and reducing overall operational costs.

The cutting systems of the MTD S265 and S262 are designed for precision and efficiency. The S265 boasts a cutting deck size that is ideal for medium to large lawns, allowing for quick mowing without sacrificing quality. Meanwhile, the S262 focuses on versatility, offering adjustable cutting heights to accommodate various grass types and weather conditions. With a mulching option available, users can also nourish their lawns while they mow.

Another technology that distinguishes these models is the intuitive user control interface. The ergonomic design of the handles, along with adjustable features, ensures that users of different sizes can comfortably operate the machines. The controls are conveniently located, allowing for smooth maneuverability while mowing.

Durability is a key characteristic of the MTD S265 and S262. Constructed from high-quality materials, these models are built to withstand the rigors of outdoor use. The robust design not only enhances longevity but also protects against environmental wear and tear. Additionally, the powder-coated finishes provide added protection against rust and corrosion, ensuring that these machines maintain their aesthetic appeal over time.

Safety features are also taken into consideration in the design of the MTD S265 and S262. Equipped with modern safety mechanisms, these models are designed to minimize the risk of accidents. Users can feel secure, knowing that they have equipment that prioritizes their safety as they maintain their outdoor spaces.

In summary, the MTD S265 and S262 represent the perfect blend of power, efficiency, and user-friendly design. With their advanced technologies and robust features, these models are excellent choices for users looking to elevate their lawn care experience. Whether you're tackling tough overgrowth or maintaining a manicured lawn, the MTD S265 and S262 are up to the challenge, making them essential tools for any gardening enthusiast.