Maintaining Your Snow Thrower | MTD 262, S265 specs

SECTION 5: MAKING ADJUSTMENTS

WARNING: NEVER attempt to make any adjustments while the engine is running.

Control Cable & Belt Tension

As a result of both the control cable and the drive belt stretching due to wear, periodic adjustments may be necessary.

If the auger seems to hesitate when rotating while the engine maintains a constant speed, an adjustment is necessary. Proceed as follows:

The upper hole in the control handle provides for an adjustment in cable tension. To adjust, disconnect the end of control cable from the bottom hole in the control handle and reinsert it in the upper hole. Test the snow thrower to see if there is a noticeable difference.

Shave Plate

•To check the adjustment of the shave plate, place the unit on a level surface. The wheels, shave plate and augers should all contact the level surface. Note that if the shave plate is adjusted too high, snow may blow under the housing. If the shave plate wears out excessively, or the unit will not self- propel, the shave plate may be adjusted too low.

NOTE: On new units or units with a new shave plate installed, the augers may be slightly off the ground.

•To adjust, tip the snow thrower back so that it rests on the handle. Loosen the lock nuts from the carriage bolts which secure the shave plate to the housing. See Figure 4.

•Move the shave plate to desired position and retighten the nuts and bolts. Make certain all four nuts are securely tightened.

Carriage Bolts	Shave Plate

Figure 4

SECTION 6: MAINTAINING YOUR SNOW THROWER

WARNING: Before servicing, repairing, or inspecting, disengage the control handle and stop engine. Wait until all moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to prevent unintended starting.

Engine

Refer to the Tecumseh engine manual packed with the snow thrower for detailed instructions regarding all engine-related maintenance.

Lubrication

•Lubricate pivot points on the control handle and the extension spring at the end of the clutch cable with a light oil once every season and before storage of the snow thrower at the end of the season.

Hardware

Check the engine and snow thrower frequently for loose or missing hardware, and tighten or replace as necessary.

Replacing the Drive Belt

The snow thrower’s drive belt is subject to wear and should be replaced if any signs of cracking, shredding or rotting is present. To change the drive belt, proceed as follows:

•Remove the belt cover from the left side of the snow thrower’s auger housing by unthreading the five hex screws which secure it in place.

•Gently grasp the idler bracket and pivot it upward to ease tension on the drive belt. See Figure 5.

•While holding the idler bracket up, carefully slip the drive belt off the engine pulley. See Figure 5.

262, S265 specifications

The MTD S265 and S262 are part of MTD's renowned line of outdoor power equipment, designed with the user in mind while maintaining superior performance for lawn care and maintenance tasks. These two models combine robust features and innovative technologies to cater to both amateur and professional users.

One of the standout features of the MTD S265 and S262 is their powerful engines. Both models are equipped with reliable, high-torque engines that deliver ample power for efficient cutting and mowing. The engines are designed for easy starting, ensuring that users can get to work without any hassle. Additionally, they are engineered for fuel efficiency, providing extended runtime and reducing overall operational costs.

The cutting systems of the MTD S265 and S262 are designed for precision and efficiency. The S265 boasts a cutting deck size that is ideal for medium to large lawns, allowing for quick mowing without sacrificing quality. Meanwhile, the S262 focuses on versatility, offering adjustable cutting heights to accommodate various grass types and weather conditions. With a mulching option available, users can also nourish their lawns while they mow.

Another technology that distinguishes these models is the intuitive user control interface. The ergonomic design of the handles, along with adjustable features, ensures that users of different sizes can comfortably operate the machines. The controls are conveniently located, allowing for smooth maneuverability while mowing.

Durability is a key characteristic of the MTD S265 and S262. Constructed from high-quality materials, these models are built to withstand the rigors of outdoor use. The robust design not only enhances longevity but also protects against environmental wear and tear. Additionally, the powder-coated finishes provide added protection against rust and corrosion, ensuring that these machines maintain their aesthetic appeal over time.

Safety features are also taken into consideration in the design of the MTD S265 and S262. Equipped with modern safety mechanisms, these models are designed to minimize the risk of accidents. Users can feel secure, knowing that they have equipment that prioritizes their safety as they maintain their outdoor spaces.

In summary, the MTD S265 and S262 represent the perfect blend of power, efficiency, and user-friendly design. With their advanced technologies and robust features, these models are excellent choices for users looking to elevate their lawn care experience. Whether you're tackling tough overgrowth or maintaining a manicured lawn, the MTD S265 and S262 are up to the challenge, making them essential tools for any gardening enthusiast.