Poulan 96192004302, 437139 owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 11

OPERATION

TO THROW SNOW (See Fig. 13)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 13

USING THE CLEAN-OUT TOOL (See Fig. 14)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

TO MOVE FORWARD AND BACKWARD (See Fig. 15)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 15

FIG. 14

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Install Discharge Chute / Chute Rotater Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Install Chute Deflector Remote Control See FigsIgnition KEY OperationKnow Your Snow Thrower PrimerRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsTo Control Snow Discharge See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig Check Engine OIL Level See Fig To Adjust Skid Plates See FigBefore Starting the Engine Scraper BAR See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingLubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Engine Speed To Adjust Cable Tension See FigTo Remove Wheels See Fig CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Service Notes Exploded KEY Part Description Bearing Plug Auger HousingScraper BAR Auger BearingSkid Plate RH Auger 27 LHAuger 27 RH Skid Plate LHChute Snow Shield 419822X431 Shield Retainer Strap Deflector SealKnob Black POP RivetRotator Head LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Cable Assembly Heat ShieldLower Handle Loop Handle LHLoop Handle RH 419797X431Handle Knob SpacerRetainer Knob REDCarriage Bolt 5/16-18 X 155377 NUT 5/16-18 169675 Flood Headlight Wire HarnessConsole Panel Headlight BezelRepair Parts Snow Thrower - Model Number PR827ES Drive END Plate Speed Selector AssemblyDrive Plate Assembly Wheel HUBClik PIN Axle ShaftRoll PIN 3/16 SprocketEngine Mounting Plate ENGINE, B&SFrame 436146X421Idler Pulley Impeller BeltTraction Belt Idler ARM Bracket428684 432336X428 Wheel Assembly LH432335X428 193071 Safety Ignition KEYDECAL, DANGER, Deflector 181037DECAL, Danger Service Notes Service Notes Service Notes Limited Warranty

96192004302, 437139 specifications

The Poulan 437139,96192004302 is a robust and versatile chainsaw designed for both the casual homeowner and the dedicated professional. Known for its reliability, this tool is well-suited for a variety of cutting tasks, from pruning branches to felling small trees. One standout feature of this chainsaw is its powerful engine, which delivers exceptional performance while maintaining efficient fuel consumption. This ensures that users can tackle demanding projects without frequently refueling, making it ideal for extended use.

Equipped with a durable 18-inch bar and chain, the Poulan 437139,96192004302 provides a balanced combination of cutting capacity and ease of maneuverability. The aggressive chain design minimizes the effort required for cutting, allowing users to achieve clean and precise cuts with less strain. Furthermore, the automatic oiling system helps to maintain optimal chain lubrication, resulting in longer chain life and reduced wear, which is essential for sustained performance.

In terms of user comfort, the chainsaw is designed with an ergonomic handle and anti-vibration technology. This feature significantly reduces fatigue during prolonged use, making it more comfortable for users to operate for extended periods. The lightweight construction further enhances handling, allowing for easy maneuvering in tight spaces or overhead cutting tasks.

Safety is also a top priority with the Poulan 437139,96192004302. It features a chain brake that can be activated in case of kickback, providing an additional layer of protection for the operator. Additionally, a safety switch prevents accidental starts, ensuring that the chainsaw remains off when it is not actively being used.

Maintenance has been simplified with this model as well. The accessible air filter and easy-to-remove spark plug make routine maintenance tasks straightforward. Regular upkeep ensures optimal performance and extends the life of the chainsaw.

In summary, the Poulan 437139,96192004302 combines power, efficiency, and user-centered design. Its advanced features, such as the automatic oiling system, ergonomic handle, and safety technologies, make it a reliable choice for anyone needing a chainsaw that can handle various cutting tasks with ease and comfort. Whether you're a homeowner or a professional, this chainsaw is built to meet your needs while prioritizing safety and performance.
Top Page Image Contents