MTD S261, S240, S230, S250, S260 warranty Thrower for off-season storage

Page 12
Off-Season
Storage
WARNING
Never store snow thrower with fuel in tank indoors or in poorly ventilated areas, where fuel fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance.
Drain fuel into an approved container outdoors, away from any open flame. Be certain engine is cool. Do not smoke. Fuel left in engine during warm weather deteriorates and will cause serious starting problems.
Do not drain carburetor if using fuel stabilizer. Never use engine or carburetor cleaning products in the fuel tank or permanent damage may occur.

7

Observe the following, when preparing your snow

 

 

thrower for off-season storage:

•Drain fuel into an approved container outdoors, away from any open flame. Allow engine to cool. Extin- guish cigarettes, cigars, pipes and other sources

of ignition prior to draining fuel. Fuel left in engine

during warm weather deteriorates and will cause serious starting problems.

• If unit is to be stored over 30 days, prepare for storage as instructed in the separate engine manual packed with your unit.

•Run engine until fuel tank is empty and engine stops due to lack of fuel.

•Remove gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine.

• Drain carburetor by pressing upward on bowl drain, located below the carburetor cover.

• Fuel stabilizers, such as STA-BIL®, are an accept- able alternative in minimizing the formation of fuel gum deposits during storage. Do not drain carburetor if using a fuel stabilizer.

• Wipe equipment with an oiled rag to prevent rust.

• Remove spark plug and pour one ounce of engine oil through spark plug hole into cylinder. Cover spark plug hole with rag. Crank engine several times to distribute oil. Replace spark plug.

• Follow the lubrication recommendations found in the Maintenance Section.

• Always store the snow thrower in a clean, dry area.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual Table of Contents Safety Labels Safe Operation Practices TrainingPreparation Maintenance & Storage OperationContents of Carton Positioning the Upper HandleKnow Your Snow Thrower Choke LeverBefore Starting Fuel And Oil MixturePositioning the Discharge Chute To Start EngineTo Stop Engine Operating the Snow ThrowerClearing Snow Operating TipsShave Plate Replacing Shave PlateControl Cable CarburetorReplacing Belt EngineLubrication Replacing Auger PaddlesThrower for off-season storage Trouble Shooting Problem Cause RemedyModels/Modèles Illustrated Parts Pièces Détachés Part Description RÉF PièceModels/Modèles 31A-2502 Warranty TWO Year Limited Warranty

261, 240, S260, S250, S230 specifications

The MTD S240, S250, S260, and S261 are part of MTD's robust lineup of snow throwers designed to tackle the harsh conditions of winter. Each model is engineered with features and technologies that enhance performance, durability, and ease of use.

The MTD S240 is a compact and lightweight snow thrower, ideal for residential users who need to clear driveways and small walkways. It features a powerful engine that provides reliable performance throughout the winter months. Its 21-inch clearing width and 12-inch intake height allow for efficient snow removal. The S240 is equipped with an adjustable chute that lets users direct the snow exactly where they want, and its manual start makes it straightforward for anyone to operate.

Moving up the range, the MTD S250 provides additional power and features that cater to larger areas. With a wider clearing width of 24 inches, it can handle heavier snowfall with ease. This model is designed with an electric start function, making it convenient for users. The S250 also benefits from advanced traction technology, providing optimal grip and maneuverability on icy surfaces. Its self-propelling feature allows users to navigate effortlessly through snow-ridden paths.

The S260 extends the capabilities even further, incorporating a larger engine that enhances its snow-clearing capabilities. This model boasts a 26-inch clearing width and an impressive intake height, making it suitable for deeper snow conditions. The S260 also includes an LED headlight, which allows for visibility during nighttime snow removal. Its heavy-duty build ensures that it can withstand the rigors of tough winter conditions while reducing maintenance needs.

Lastly, the MTD S261 is a pinnacle model that comes with all the advanced features necessary for professional-grade snow removal. With a larger and more powerful engine, this snow thrower is capable of managing the most challenging snow conditions. Its 27-inch clearing width combined with a high intake height allows it to tackle even the heaviest of snowfalls. The S261 also features an ergonomic design, including heated hand grips and fingertip controls, ensuring comfort for the user during extended operation.

In conclusion, the MTD S240, S250, S260, and S261 models each come equipped with unique features tailored to various snow-clearing needs. From compact residential solutions to powerful options for professional use, MTD provides a snow thrower for every challenge that winter throws your way.
Top Page Image Contents