Poulan 436439, 96182000400, PR621ES Filling the Engine with Oil Product Overview, Lubrication

Page 6

3. Filling the Engine with Oil

Product Overview

ENGINE

See engine manual.

LUBRICATION

Use only high quality detergent oil rated with API service classification SG–SL. Select the oil's SAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Changetheoilafterevery25hoursofoperationoratleastonce a year if the snow thrower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil fill cap / dipstick securely each time you check the oil level.

Figure 5

NOTE: 10W30 synthetic oil is acceptable for use in cold temperatures.

1.Move the snowthrower to a level surface.

2.Clean around the dipstick (Figure 6).

NOTE: Dipstick location may vary depending on engine type.

3.Remove either side mounted filler cap dipstick or high oil fill dipstick and wipe it clean.

1

Fill if oil is below “Add” on the dipstick

Fill if oil is

below letter

“L” on the

filler cap

Figure 6

1.Oil filler cap/dipstick

4.Insert the dipstick into the filler neck and turn clockwise until fully seated. Then remove the dipstick by turning it counter-clockwise.

5.Fill oil to "FULL" on dipstick with the recommended oil.

6.Securely screw in the oil filler cap/dipstick.

13

1

4

 

 

2

 

12

 

 

*11

3

5

 

 

6

7 8

10

 

9

 

 

 

 

 

*11

 

 

 

Figure 7

 

1.

Discharge chute

8.

Electric-start button

2.

Chute deflector handle

9.

Oil drain plug

3.

Fuel tank cap

10.

Drive belt cover

4.

Control bar

*11.

Oil fill cap/dipstick

5.

Recoil start handle

12.

Ignition key

6.

Primer

13.

Chute deflector

7.

Choke lever

 

 

*Dipstick location may vary depending on engine type.

6

Image 6
Contents PR621ES Come ALERT!!! Your Safety is Involved Safe Operation Practices for Walk-Behind Snow ThrowersShut the Engine OFF API SG-SLF6RTC Table of Contents Setup Installing the Discharge ChuteUnfolding the Handle Filling the Engine with Oil Product Overview LubricationOperation Filling the Fuel TankChecking the Engine Oil Level Starting the Engine Engaging the Auger Blades Disengaging the Auger BladesClearing a Clogged Discharge Chute Adjusting the Discharge Chute and Chute DeflectorStopping the Engine Preventing Freeze-up after UseMaintenance Operating TipsAdjusting the Control Cable Inspecting the Auger BladesChanging the Engine Oil Servicing the Spark Plug Replacing the Drive Belt Engine OIL Storage Storing the SnowthrowerFuel System CylinderTroubleshooting Does not startSSST-Chute asm5 KEY Part QTY Description CONTROL.CABLE BAIL.HANDLE.PAINT.MS431HANDLE.PNT.UPPER.SSST KNOB.HANDLE.BLACKBOLT.CARRIAGE KEY Part NO. noQTY Description PLATE.CENTER.BLADE 13 HEX.NUT.1/4-20 Nylon LockingSSST-Shroud asm8 COVER.DRIVE.SIDE.MS428 KEY HousingCOVER.NON-DRIVE.SIDE.MS428 TOP.COVERSSST-Frame asm3 WHEEL.7X1.5.DMD.GS.3SPK.MS428 LCT.ENGINEFRAME.WELDMENT NUT.PUSH.AXLE.0.5INPULLEY.ENG.TRACTION.3/4 SPACER.ENGINE.CRANKKEEPER.ENGINE.BELT WASHER.HARDENService Notes Limited Warranty

PR621ES, 96182000400, 436439 specifications

The Poulan PR621ES, 436439, 96182000400 is a powerful and versatile snow thrower that is designed to tackle the challenges of winter weather with ease. This machine is particularly efficient for homeowners who face heavy snowfall, ensuring quick and effective snow removal from driveways, sidewalks, and other surfaces.

One of the standout features of the Poulan PR621ES is its strong 208cc engine. This four-stroke engine provides ample power for tackling deep snow while ensuring reliable performance. The electric start option is a significant convenience, allowing users to easily start the machine with the push of a button, minimizing the hassles often associated with traditional recoil starting systems, especially during cold weather.

The PR621ES comes equipped with a 21-inch clearing width, making it suitable for medium to large areas. Its auger allows for effective snow collection and throwing, making the snow clearing process efficient. The machine can throw snow distances of up to 30 feet, which helps in directing snow where it is desired, preventing accumulation in unwanted areas.

Another notable characteristic is its adjustable chute, which allows users to control the direction and distance of the snow discharge. This feature is complemented by the machine’s easy-to-use hand controls that facilitate simple operation while maintaining focus on the task at hand.

The PR621ES is designed with user comfort in mind. Its ergonomically designed handle provides a comfortable grip, reducing fatigue during prolonged use. Additionally, the snow thrower is equipped with snow tread tires that enhance traction, ensuring that it can navigate through various snow conditions without slipping.

Safety is also a priority with the Poulan PR621ES. The design includes safety features that help prevent accidental starts and injuries during operation. The snow thrower’s build quality is robust, ensuring durability and longevity, making it a reliable investment for years to come.

Overall, the Poulan PR621ES, 436439, 96182000400 is an excellent choice for those looking for a reliable, efficient, and easy-to-use snow removal solution. Its blend of power, convenience, and innovative features makes it a standout option in the snow thrower market, meeting the needs of users facing the challenges of winter weather with confidence.