Poulan 428707 HOW to USE Your Snow Thrower, Stopping, To USE Fuel SHUT-OFF Valve See Fig

Page 9

OPERATION

The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear

safety glasses or eye shields while operating 00155 your snow thrower or performing any adjust- ments or repairs. We recommend standard safety glasses

or a wide vision safety mask worn over spectacles.

HOW TO USE YOUR SNOW THROWER

Know how to operate all controls before adding fuel or attempting to start the engine.

STOPPING

TRACTION DRIVE

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

AUGER

•Release the auger control lever to stop throwing snow.

ENGINE

1.Move ON / OFF switch to “OFF” position.

2.Remove (do not turn) safety ignition key to prevent unauthorized use.

NOTE: Never use choke to stop engine.

TO USE FUEL SHUT-OFF VALVE (See Fig. 9)

The fuel shut-off valve is located beneath the fuel tank on the engine. Always operate the snow thrower with the fuel shut-off valve in the OPEN position.

OFF

OPEN

FIG. 9

TO USE CHOKE CONTROL (See Fig. 10)

The choke control is located on the engine. Use the choke control whenever you are starting a cold engine. Do not use to start a warm engine.

•To engage choke, rotate lever to “FULL” position.

FULL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FIG. 10

9

TO CONTROL SNOW DISCHARGE (See Figs. 11 & 12)

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

WARNING: If the discharge chute or auger become clogged, shut-off engine and wait for all moving parts to stop. Use the clean-out tool, NOT YOUR HANDS, to unclog the chute and/or auger.

The DIRECTION in which snow is to be thrown is controlled by the discharge chute control lever.

•To change the discharge chute position, press downward on discharge chute control lever and move lever left or right until chute is in desired position. Be sure lever springs back and locks into desired position.

DISCHARGE CHUTE

CONTROL LEVER

FIG. 11

The DISTANCE that snow is thrown is controlled by the position of the chute deflector. Set the deflector low to throw snow a short distance; set the deflector higher to throw snow farther.

•To change the deflector position, loosen knob, move de- flector to desired position and tighten knob securely.

HIGH

POSITION

KNOB

CHUTE

DEFLECTOR

LOW POSITION

FIG. 12

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONParts Packed Separately in Carton Remove Snow Thrower from CartonInstall Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Know Your Snow Thrower OperationPrimer Ignition KEYRecoil auxiliary starter handle used for starting engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo USE Fuel SHUT-OFF Valve See Fig To USE Choke Control See FigUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine To Adjust Skid Plates See FigScraper BAR See Fig Check Engine OIL Level See FigTo Start Engine Snow Throwing TipsBefore Stopping If Recoil Starter has FrozenMaintenance Engine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Shear Bolts See FigTo Replace Belts See Fig To Remove Wheels See Fig To Adjust Cable Tension See FigCarburetor Engine SpeedOther StorageFuel System Engine OILTroubleshooting 23 22 KEY Part Description Auger Assembly LH Auger HousingAuger Assembly RH Scrapper BARBearing Plug Auger BearingPOP Rivet Knob BlackWasher Plastic WasherCable Assembly Adjustable LEVER/CABLE Rotator AssemblyCable Assembly Heat Shield Rotator HeadRepair Parts Snow Thrower Model Number 96194000801 Handles Handle Grip 196944X007 Panel Bracket LH 196943X007 Panel Bracket RHLower Tube Pivot SupportCarriage Bolt 5/16-18 X 155377 NUT 5/16-18 169675 Part KEY Description Repair Parts Snow Thrower Model Number 96194000801 Drive Drive Plate Assembly AssemblySpeed Selector Rubber RingAxle Shaft Repair Parts Drive Snow Thrower Model NumberRoll PIN 3/16 SprocketFrame Complete LCT Engine427963X428 Engine Mounting PlateTraction Belt Impeller BeltIdler ARM Bracket Idler PulleyWheel Assembly LH Repair Parts Snow Thrower Model Number 96194000801 Wheels187831X417 187866X417Safety Ignition KEY Power CordRetainer PIN Wrench181037 Repair Parts Snow Thrower Model Number 96194000801 DecalsDECAL, Danger DECAL, DANGER, DeflectorLimited Warranty

96194000801, 961940008, 428707 specifications

The Poulan 428707,96194000801,961940008 is a powerful and versatile outdoor power tool designed for landscaping and yard maintenance. This model impresses with its robust features, advanced technologies, and user-oriented characteristics that cater to both professional landscapers and DIY enthusiasts.

One of the standout features of the Poulan 428707 is its potent engine, designed to deliver reliable performance for a variety of outdoor tasks. The engine's efficiency enables it to tackle demanding jobs such as trimming, edging, and clearing debris, making it an essential tool for maintaining a pristine lawn or garden. The lightweight design of the equipment enhances maneuverability, ensuring that users can easily navigate tight spaces and complex terrains without straining themselves.

In terms of technology, the Poulan 428707 incorporates low-emission capabilities that are compliant with environmental regulations. This means that users can enjoy the powerful performance of the tool while minimizing their environmental footprint. The ergonomic design is another notable technological advancement; it features comfortable grips and adjustable handles, allowing users to work for extended periods without discomfort or fatigue.

The Poulan 428707 is equipped with a range of cutting attachments, offering versatility for different tasks. Whether you need to cut through thick brush or perform delicate trimming, this tool can adapt to meet your needs. The easy-to-use system for swapping out attachments further simplifies the process, making it user-friendly for those who may not have previous experience with such equipment.

Durability is a key characteristic of the Poulan 428707, as it is constructed from high-quality materials designed to withstand wear and tear. This durability ensures longevity, providing users with a reliable tool that can handle seasonal demands year after year.

Overall, the Poulan 428707,96194000801,961940008 stands out as a top choice in outdoor power tools due to its functionality, innovative technologies, and robust build quality. Its combination of power, efficiency, and user-friendly design makes it an indispensable addition to any outdoor maintenance arsenal, positioning it as a leading option for individuals looking to enhance their landscaping capabilities. Whether you're maintaining your home garden or managing larger landscaping projects, this tool will help you achieve professional results with ease.
Top Page Image Contents