MTD 993 manual OPERATOR’S Manual

Page 1

OPERATOR’S MANUAL

Model Series

993

Snow Thrower

IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest- covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.

MTD PRODUCTS INC P.O. BOX 368022 CLEVELAND, OHIO 44136-9722

PRINTED IN U.S.A.

FORM NO. 770-10278

(06/99)

 

Image 1
Contents OPERATOR’S Manual Calling Customer Support Finding Your Model NumberCopy the model number here Copy the serial number hereTraining Important Safe Operation PracticesPreparation OperationSafety Labels Found on Snow Thrower Maintenance and StorageAuger Shear Bolts SET-UP InstructionsAuger and Traction Control Clutch Adjustment Final AdjustmentsSkid Shoe Adjustment See Figure Shift Lever Adjustment See FigureShift Lever ControlsChute Directional Control Traction CONTROL/AUGER Clutch LockGAS and OIL FILL-UP OperationTo Start Engine Adjustments Lubrication Belt Removal and Replacement MaintenanceAugers Shave Plate and Skid ShoesDrive Belt Changing the Friction Wheel OFF-SEASON StorageSpacer Support Bracket ShaftTrouble Possible Causes Corrective Action Trouble Shooting GuideModel 193 6478 Model Model Model Model Model Model Model MANUFACTURER’S Limited Warranty for