MTD Series 140 through E173 manual Maintenance And Storage, Your Responsibility

Page 4

stopped. Disconnect spark plug wire and keep away from plug to prevent accidental starting.

•Do not run engine indoors, except when starting engine and transporting snow thrower in or out of building. Open doors. Exhaust fumes are dangerous.

•Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.

•Never operate snow thrower without guards, plates, or other safety protection devices in place.

•Never operate snow thrower near glass enclosure, automobiles, window wells, drop off, etc., without proper adjustments of snow thrower discharge angle. Keep children and pets away.

•Do not overload machine capacity by attempting to clear snow at too fast a rate.

•Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing.

•Never direct discharge at bystanders or allow anyone in front of unit.

•Disengage power to collector/impeller when transporting or not in use.

•Use only attachments and accessories approved by the manufacturer of snow thrower (such as wheel weights, counter weights, cabs, etc.).

•Never operate the snow thrower without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk, never run.

•Muffler and engine become hot and can cause a burn. Do not touch.

Maintenance And Storage

•Check shear bolts, engine mounting bolts, etc., at frequent intervals for proper tightness to be sure equipment is in safe working condition.

•Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow engine to cool before storing in any enclosure.

•Always refer to operator's manual instructions for important details if snow thrower is to be stored for an extended period.

•Run machine a few minutes after throwing snow to prevent freeze up of collector/impeller.

•Check clutch controls periodically to verify they engage and disengage properly and readjust if necessary. Refer to operator's manual for adjustment instructions.

Your Responsibility

Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine. Some of the safety labels are reproduced below. Review them and follow their instructions.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operator’s Manual Table of Contents Important Safe Operation Practices TrainingOperation PreparationMaintenance And Storage Your ResponsibilityAssembling Your Snow Thrower Installing chute crank Assembling the chuteKnow Your Snow Thrower Primer ButtonOperating Your Snow Thrower Shave plate Belt tensionService Replacing beltReplacing shave plate EngineGeneral Recommendations MaintenanceLubrication OFF-SEASON Storage Troubleshooting Guide Problem Cause RemedyParts List for Models 140 Through E173 Models 140 through E173 Part DescriptionModels 140, 150, E150 and E151 Models 142, E152, E172 and E173Models 140 and E142 Models 150, E150 and E173 Models E151 and E172 Models 140 and E142 Model Models E150, E151, E152, E172, E173 Your Notes Dates MANUFACTURER’S Limited Warranty for

Series 140 through E173 specifications

The MTD Series 140 through E173 represents a significant advancement in the landscape of modern machinery and equipment. Designed for exceptional performance, energy efficiency, and user-friendliness, these models cater to the needs of both commercial and residential users.

One of the standout features of the MTD Series is its powerful engine options, which range from reliable gas engines to advanced electric motors. These engines are designed to deliver steady and powerful performance while ensuring reduced emissions and lower fuel consumption. This balance of power and efficiency makes the MTD Series ideal for various applications, from heavy-duty tasks to everyday yard maintenance.

An integral part of the design philosophy of the MTD Series is ergonomics. The machines are fitted with user-friendly controls and adjustable components, allowing for a more comfortable experience during operation. Features such as easy-grip handles, adjustable cutting heights, and intuitive dashboards ensure that users can operate the equipment with minimal effort and maximum precision.

Incorporating innovative technology, the MTD Series is equipped with smart features that enhance usability. Self-propelling mechanisms provide added convenience, allowing users to navigate challenging terrain with ease. Moreover, many models come with advanced cutting systems that improve grass handling, resulting in cleaner cuts and healthier lawns.

Durability is another hallmark of the MTD Series. Designed with robust materials, the equipment is built to withstand harsh conditions and daily wear and tear. This commitment to quality ensures that even under rigorous use, the machines maintain performance and reliability over time.

Maintenance is made easy with the MTD Series. Easy access to engine parts and user-friendly maintenance schedules help owners keep their machinery in prime condition without requiring extensive technical knowledge. With a focus on longevity, viewers can expect both reliable performance and upkeep ease.

In summary, the MTD Series 140 through E173 is a blend of power, efficiency, ergonomics, and durability. Ideal for a variety of applications, these models not only aim to meet but exceed user expectations through smart technology and innovative features, making them a top choice for anyone in need of reliable outdoor machinery. Whether for professional landscaping or home gardening, the MTD Series is a trustworthy partner in achieving optimal results.
Top Page Image Contents