Operating Your Snow Thrower | MTD Series 140 through E173 specs

SECTION 4: OPERATING YOUR SNOW THROWER

Fuel and oil mixture

WARNING: Handle gasoline carefully; remember that it is highly flammable. Never fill fuel tank indoors, when engine is running or while engine is still hot. Do not smoke when filling fuel tank.

Your snow thrower uses a two cycle engine that requires a mixture of gasoline and two cycle engine oil. Refer to the engine operator’s manual for proper oil and fuel recommendations.

•A plastic cup was provided inside the fuel fill opening on the fuel tank. Remove and discard this cup before filling up the tank. Use the seperate fuel tank cap to close after fill-up.

Starting engine

•To start the engine of your snow thrower, follow the starting instructions in the engine operator’s manual.

Operating snow thrower

				r
			e
		t			e
r		a		n	e	Upper
e				c
G			t
			a
		s				Discharge
	i
D

Chute

L	e	s s		n	ce
			ta
	is

D

Hand

Knob

Figure 10

•Adjust the upper discharge chute up or down as shown in Figure 10. Then use the chute crank to position the discharge chute in order to discharge snow with the wind.

WARNING: Do not throw snow towards a building as objects could be discharged with enough force to cause damage.

•After making sure no bystanders or obstacles are in front of the unit, engage the auger control handle. See Figure 11. As the snow thrower starts to move, maintain a firm hold on the handle, and

guide the snow thrower along the path to be

cleared.

•Release the auger control handle to stop the snow throwing action and the forward motion.

Press auger control handle

to engage auger

Turn handle to change discharge direction

Figure 11

Stopping engine

•Run the engine for a few minutes before stopping to help dry any moisture on the engine.

•To stop engine: Turn ignition key to OFF position and remove it from the snow thrower.

IMPORTANT: Keep the ignition key in a safe place. Engine will not start without it.

•Wipe all snow and moisture from the unit. Move the choke lever back and forth several times and leave it in the ON position.

Operating tips

•For most efficient snow removal, remove snow immediately after it falls.

•Discharge snow downwind whenever possible. Slightly overlap each previously cleared path.

•Lifting up on the handle will allow the rubber on the augers to propel the snow thrower forward. Pushing downward on the handle will raise the augers off the ground and stop the forward motion.

NOTE: Excessive upward pressure on the handle will result in premature wear on the rubber auger blades which would not be covered by warranty.

•Run the engine for a few minutes before stopping to help dry any moisture on the engine.

•Clean the snow thrower thoroughly after each use.

WARNING: Do not operate this snow thrower on gravel as loose gravel can easily be picked up and thrown by the auger, causing injury to people around and/or damage to the snow thrower.

Series 140 through E173 specifications

The MTD Series 140 through E173 represents a significant advancement in the landscape of modern machinery and equipment. Designed for exceptional performance, energy efficiency, and user-friendliness, these models cater to the needs of both commercial and residential users.

One of the standout features of the MTD Series is its powerful engine options, which range from reliable gas engines to advanced electric motors. These engines are designed to deliver steady and powerful performance while ensuring reduced emissions and lower fuel consumption. This balance of power and efficiency makes the MTD Series ideal for various applications, from heavy-duty tasks to everyday yard maintenance.

An integral part of the design philosophy of the MTD Series is ergonomics. The machines are fitted with user-friendly controls and adjustable components, allowing for a more comfortable experience during operation. Features such as easy-grip handles, adjustable cutting heights, and intuitive dashboards ensure that users can operate the equipment with minimal effort and maximum precision.

Incorporating innovative technology, the MTD Series is equipped with smart features that enhance usability. Self-propelling mechanisms provide added convenience, allowing users to navigate challenging terrain with ease. Moreover, many models come with advanced cutting systems that improve grass handling, resulting in cleaner cuts and healthier lawns.

Durability is another hallmark of the MTD Series. Designed with robust materials, the equipment is built to withstand harsh conditions and daily wear and tear. This commitment to quality ensures that even under rigorous use, the machines maintain performance and reliability over time.

Maintenance is made easy with the MTD Series. Easy access to engine parts and user-friendly maintenance schedules help owners keep their machinery in prime condition without requiring extensive technical knowledge. With a focus on longevity, viewers can expect both reliable performance and upkeep ease.

In summary, the MTD Series 140 through E173 is a blend of power, efficiency, ergonomics, and durability. Ideal for a variety of applications, these models not only aim to meet but exceed user expectations through smart technology and innovative features, making them a top choice for anyone in need of reliable outdoor machinery. Whether for professional landscaping or home gardening, the MTD Series is a trustworthy partner in achieving optimal results.