Poulan 421104 owner manual Using the CLEAN-OUT Tool See Fig, To Move Forward and Backward See Fig

Page 11

OPERATION

DISCHARGE CHUTE

CONTROL LEVER

CHUTE DEFLECTOR

REMOTE CONTROL LEVER

FIG. 14

USING THE CLEAN-OUT TOOL (See Fig. 15)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the auger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to pre- vent accidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting the engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

FIG. 15

TO MOVE FORWARD AND BACKWARD (See Fig. 16)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 16

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotator Head See FigInstall Chute Deflector Remote Control See Figs Ignition KEY OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigADD Gasoline See Fig To Adjust Skid Plates See FigBefore Starting the Engine Check Engine OIL Level See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingMaintenance Engine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Storage Other TroubleshootingExploded KEY Part Description Auger 24 RH Auger HousingScrapper BAR Auger 24 LHBearing Plug Auger BearingPlastic Washer Knob BlackPOP Rivet WasherRotator Pivot Bracket LEVER/CABLE Rotator AssemblyCable Assembly Rotator HeadHandle Knob SpacerRetainer Knob REDPivot Support Weldment Panel Bracket LH Panel Bracket RHHandle Grip Lower HandleShifter ROD Bottom Impeller ROD AssemblyTraction ROD Assembly Shifter ROD TOPConsole Panel Drive Control ARM Speed Selector Assembly43 420900 Drive Plate Assembly END PlateClik PIN Axle ShaftRoll PIN 3/16 SprocketBelt Cover Tecumseh Engine ModelFrame Engine Mount Plate187866X421 Wheel Assembly LHSafety Ignition KEY 187831X421DECAL, Poulan PRO DECAL, DangerDECAL, Poulan PRO, HP/24 DECAL, DANGER, DeflectorLimited Warranty

421104 specifications

The Poulan 421104 is a well-regarded chainsaw that has captured the attention of both casual users and professionals alike. Renowned for its reliability and robust performance, the Poulan 421104 is ideal for a myriad of tasks, including cutting firewood, clearing brush, and performing light to moderate tree trimming.

One of the main features of the Poulan 421104 is its powerful 42cc engine, which strikes a balance between efficiency and power. This engine is capable of delivering strong performance while remaining lightweight, making it user-friendly for extended periods. The chainsaw's gas-powered design allows for robust cutting power without the limitations that often come with electric saws, such as battery life.

The Poulan 421104 incorporates several technological advancements that enhance its usability. It features an easy-start system that reduces the effort needed to start the engine. This is particularly beneficial for users who may struggle with traditional pull-starts, ensuring a smoother experience right from the outset. The chainsaw is also equipped with an automatic oiling system, which continuously lubricates the chain during operation, ensuring minimal friction and efficient performance. This not only prolongs the life of the chain but also helps maintain optimal cutting efficiency.

Another notable characteristic is its reduced vibration technology. This feature minimizes vibrations transmitted to the user’s hands, ensuring greater comfort during use. This is particularly advantageous when working on more extensive jobs that require prolonged handling. The Poulan 421104 also features a 16-inch bar length that strikes a good balance between maneuverability and cutting capacity, allowing users to tackle a variety of cutting tasks with ease.

The chainsaw also boasts a chain brake feature, enhancing safety by allowing the user to stop the chain quickly in case of kickback or an emergency situation. The overall design of the Poulan 421104 prioritizes user safety, making it a suitable choice for both novices and seasoned users.

In summary, the Poulan 421104 is a versatile and reliable chainsaw, boasting a powerful engine, user-friendly features, advanced technologies, and enhanced safety mechanisms. It is designed for performance and durability, making it an excellent addition to any tool collection. Whether for professional landscaping or home maintenance, the Poulan 421104 proves to be a valuable asset for various cutting tasks.
Top Page Image Contents