Simplicity SNP I1924EX, SMI I1924EX, SMI I 1924EX, B&S24(CE), 9GT Rotator Shaft Removal Pin, Hair

Page 17

Intermediate Frame Snowthrowers

B

A

Figure 14. Rotator Shaft Removal

A.Pin, Hair

B.Shaft

A

C

B

D

Figure 15. Offset Tube (Lower) Removal

A.Nuts, KEPS, hex, 5/16-18

B.Bolts, Carriage, 5/16 x 1-1/2

C.Tube, Offset

D.Bracket, tube support

9.Remove hair pin (A, Figure 14) and slide rod (B) backward about 3 inches (until shaft separates from the worm drive).

10.Remove two 5/16-18 KEPS hex nuts (A, Figure 15), and two 5/16-18 x 1-1/2 carriage bolts (B) securing the offset tube (C) to the tube support bracket (D).

11.Lift the Chute and rotator (A, Figure 16) off of the auger housing.

12.Remove the upper four capscrews (A, Figure 17) that hold together the auger housing (C) and the frame

(D). Loosen the lower two capscrews (B). The auger housing (C) and the frame (D) can now be split apart for removal of the belt.

13.Remove the old auger drive belt (D, Figure 12) from the impeller pulley . Replace the auger drive belt with an original factory replacement belt available from an authorized service center.

14.Install the new auger drive belt (D) onto the impeller pulley.

A

Figure 16. Chute and Rotator Removal

A. Chute and Rotator

 

A

 

B

D

C

 

Figure 17. Frame and Axle Housing Splitting

A.Upper Capscrews

B.Lower Capscrews

C.Auger Housing

D.Frame

NOTE: To assemble the auger housing to the frame, have someone hold the auger clutch lever in the ENGAGED position. This will move the idler arm and pulley enough to allow the auger drive pulley to move back into position.

15.Assemble the auger housing (C, Figure 17) to the frame with the four upper taptite screws (A) that were removed in step 12. Tighten the two lower taptite screws (B). Tighten all taptite screws to

40-50 lb-in (4,5-5,6 Nm).

16.Attach chute and offset tube previously removed (Figure 15 and 16. Tighten all KEPS nuts to 11 lb-ft (15 Nm).

09/2007

17

TP 300-4681-01-IW-SN

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Intermediate Frame Snowthrowers Safety Rules Table of Contents PSI Lb-ft 16-18 x 1-1/2 Intermediate Frame Snowthrowers TP 300-4681-01-IW-SN 09/2007 Intermediate Frame Snowthrowers Check Engine Controls Perform Safety ChecksCheck Snowthrower Controls Release auger control. Auger must stop within 5 seconds Auger Drive AdjustmentTraction Drive Adjustment Shift Lever Adjustment Nuts, 1/4-20 Scraper Bar Skid Shoe AdjustmentAuger Drive Belt Belt AdjustmentRotator Cover Removal Nut, flange, lock 5/16-18 Belt ReplacementRotator Shaft Removal Pin, Hair Traction Belt Change Swing Plate Alignment Tabs

9GT, 9GT B&S24(CE), B&S24, B&S 24 (CE), B&S24(CE) specifications

The Simplicity SMI I1924EX, 9GT, B&S24, SMI I1924E, and SNP I1924EX are cutting-edge lawn tractors designed to revolutionize the way users maintain their yards. Each model brings unique features that cater to a variety of landscaping needs, making them ideal for both residential and light commercial applications.

One of the standout features of these models is their powerful Briggs & Stratton engines. The B&S24 engine, in particular, delivers robust performance with impressive torque and reliability. This engine capability ensures that even the toughest mowing tasks can be tackled with ease. The powerful engine is complemented by a smooth transmission system, providing seamless speed adjustments and enhancing overall maneuverability.

Another key characteristic is their innovative cutting technology. With a mower deck designed for precision, the Simplicity SMI I1924EX series provides a clean, even cut, significantly reducing the amount of time spent on lawn maintenance. The decks are engineered for superior grass dispersal, leading to healthier lawn growth while minimizing clumping. The adjustable cutting height feature allows users to achieve the perfect lawn aesthetic.

These models also boast user-friendly controls, making them accessible for users of all experience levels. Intuitive dashboards and ergonomic seating ensure comfort during prolonged use. Many of the models in this series come equipped with cruise control, allowing for a consistent mowing speed that reduces user fatigue.

Durability is a cornerstone of Simplicity’s design philosophy. The robust construction of the chassis and the high-quality materials used in the build ensure that these tractors can endure the rigors of regular use over time. This reliability is further enhanced by features like a reinforced mower deck that withstands rough terrain and obstacles.

Additionally, the Simplicity SMI I1924 series incorporates advanced technologies such as easy-start systems and low emissions engines, which make them environmentally friendly choices for lawn care enthusiasts. The easy maintenance features, including accessible oil drains and air filters, simplify upkeep, allowing users to spend more time mowing and less time on maintenance.

In summary, the Simplicity SMI I1924EX, 9GT, B&S24, SMI I1924E, and SNP I1924EX lawn tractors combine power, precision, comfort, and durability. They are the perfect solution for anyone seeking efficient lawn care equipment that meets the demands of modern landscaping. Whether for home use or professional landscaping services, these models are built to deliver exceptional results.
Top Page Image Contents