Simplicity SMI I1924EX, SNP I1924EX, SMI I 1924EX, B&S 24 (CE), 9GT B&S24(CE) manual Safety Rules

Page 2

Intermediate Frame Snowthrowers

SAFETY RULES

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

The triangle in text signifies important cautions or warnings which must be followed.

GENERAL OPERATION

Read, understand, and follow all instructions in the manual and on the unit before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the unit (local regulations can restrict operator age).

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown.

Be sure the area is clear of other people. Stop unit if any- one enters the area.

Always look down and behind before and while travelling in reverse.

Be aware of the discharge direction and do not point it at anyone. Do not point the discharge at glass enclosures, automobiles, or windows.

Disengage all clutches (release drive and auger control levers) before starting the engine.

Never leave a running unit unattended. Always disengage the auger and traction controls, stop engine, and remove keys.

Stop engine before unclogging chute.

Operate only in daylight or good artificial light.

Do not operate the unit while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing road- ways.

Use extra care when loading or unloading the unit into a trailer or truck.

Keep in mind the operator is responsible for accidents occurring to other people or property.

Data indicates that operators, age 60 years and above, are involved in a large percentage of power equipment-related injuries. These operators should evaluate their ability to

operate the unit safely enough to protect themselves and others from injury.

All operators should seek and obtain professional and prac- tical instruction.

Always wear substantial footwear and appropriate winter clothing. Wear foot-ware that improves traction on slippery slopes. DO NOT wear long scarves or loose clothing that could become entangled in moving parts.

Before using, always visually check that all hardware is present, in-tact, and secure. Replace worn or damaged parts.

Never operate the machine with defective guards, or with- out safety protective devises in place.

Stop engine before: refuelling, removing an attachment, making adjustments (unless the adjustment can be made from the operator’s position).

Follow the manufacturer’s recommendation for wheel weights or counterweights.

Adjust skid shoe height to clear gravel or crushed rock sur- faces.

Do not touch snowthrower parts which may be hot from operation. Allow such parts to cool before attempting to service the unit.

CLEARING A CLOGGED DISCHARGE CHUTE

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snowthrowers. Always use a clean out tool, not your hands. to clean out the discharge chute.

To clear the chute:

1.SHUT OFF THE ENGINE.

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean out tool, not your hands.

SLOPE OPERATION

WARNING

Never operate on slopes greater than 17.6 percent (10°) which is a rise of 3-1/2 feet (106 cm) vertically in 20 feet (607 cm) horizontally.

When operating on slopes use additional wheel weights or counterweights. See your dealer to determine which weights are available and appropriate for your unit.

Select slow ground speed before driving onto slope. Travel UP and DOWN the slope, never across the face, use caution when changing directions and DO NOT START OR STOP ON SLOPE.

Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not operate on it.

EMISSIONS

Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm.

Look for the relevant Emissions Durability Period and Air Index information on the engine emissions label.

Do

See your authorized dealer for recommendations counter- weights to improve stability.

Travel up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could over- turn the unit. Snow can hide obstacles.

Use slow speed. Tires may lose traction on slopes. Choose a low gear so that you will not have to stop or shift while on the slope.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Always keep unit in gear especially when traveling down-

hill.

Do Not

Do not start or stop on a slope. If tires lose traction, disen- gage the auger and proceed slowly straight down the slope.

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not operate near drop-offs, ditches, or embankments. The unit could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not operate on wet surfaces. Reduced traction could cause sliding.

Do not shift to neutral and coast down hills.

TP 300-4681-01-IW-SN

2

09/2007

Image 2
Contents Intermediate Frame Snowthrowers Safety Rules Table of Contents PSI Lb-ft 16-18 x 1-1/2 Intermediate Frame Snowthrowers TP 300-4681-01-IW-SN 09/2007 Intermediate Frame Snowthrowers Perform Safety Checks Check Engine ControlsCheck Snowthrower Controls Auger Drive Adjustment Release auger control. Auger must stop within 5 secondsTraction Drive Adjustment Scraper Bar Skid Shoe Adjustment Shift Lever Adjustment Nuts, 1/4-20Belt Adjustment Auger Drive BeltBelt Replacement Rotator Cover Removal Nut, flange, lock 5/16-18Rotator Shaft Removal Pin, Hair Traction Belt Change Swing Plate Alignment Tabs

9GT, 9GT B&S24(CE), B&S24, B&S 24 (CE), B&S24(CE) specifications

The Simplicity SMI I1924EX, 9GT, B&S24, SMI I1924E, and SNP I1924EX are cutting-edge lawn tractors designed to revolutionize the way users maintain their yards. Each model brings unique features that cater to a variety of landscaping needs, making them ideal for both residential and light commercial applications.

One of the standout features of these models is their powerful Briggs & Stratton engines. The B&S24 engine, in particular, delivers robust performance with impressive torque and reliability. This engine capability ensures that even the toughest mowing tasks can be tackled with ease. The powerful engine is complemented by a smooth transmission system, providing seamless speed adjustments and enhancing overall maneuverability.

Another key characteristic is their innovative cutting technology. With a mower deck designed for precision, the Simplicity SMI I1924EX series provides a clean, even cut, significantly reducing the amount of time spent on lawn maintenance. The decks are engineered for superior grass dispersal, leading to healthier lawn growth while minimizing clumping. The adjustable cutting height feature allows users to achieve the perfect lawn aesthetic.

These models also boast user-friendly controls, making them accessible for users of all experience levels. Intuitive dashboards and ergonomic seating ensure comfort during prolonged use. Many of the models in this series come equipped with cruise control, allowing for a consistent mowing speed that reduces user fatigue.

Durability is a cornerstone of Simplicity’s design philosophy. The robust construction of the chassis and the high-quality materials used in the build ensure that these tractors can endure the rigors of regular use over time. This reliability is further enhanced by features like a reinforced mower deck that withstands rough terrain and obstacles.

Additionally, the Simplicity SMI I1924 series incorporates advanced technologies such as easy-start systems and low emissions engines, which make them environmentally friendly choices for lawn care enthusiasts. The easy maintenance features, including accessible oil drains and air filters, simplify upkeep, allowing users to spend more time mowing and less time on maintenance.

In summary, the Simplicity SMI I1924EX, 9GT, B&S24, SMI I1924E, and SNP I1924EX lawn tractors combine power, precision, comfort, and durability. They are the perfect solution for anyone seeking efficient lawn care equipment that meets the demands of modern landscaping. Whether for home use or professional landscaping services, these models are built to deliver exceptional results.