Poulan PP5524ESA Install Discharge Chute / Chute Rotater Head See Fig, Install Weight BAG See Fig

Page 7

ASSEMBLY / PRE-OPERATION

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If nec- essary, rotate chute assembly to align square and pin on underside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE RO-

TATER HEAD

3/8 LOCKNUT

3/8 WASHER

CHUTE

BRACKET

PIN

THREADED

STUD

ROTATER HEAD

MOUNTING

BRACKET

FIG. 7

INSTALL WEIGHT BAG (See Fig. 8)

Though seldom required, the weight bag will reduce the tendency of the auger housing to ride up on hard, icy drifts. Should conditions require it, install as follows:

1.Shut off engine and wait for all moving parts to stop.

2.Fill weight bag with desired amount of sand.

3.Place weight bag on top of auger housing with mount- ing clamp at front edge of auger housing as shown.

4.Insert weight bag between the auger housing and the bar of the mounting clamp as shown and secure with 5/16-18 x 1-1/2 capscrews. Tighten securely.

IMPORTANT: Mount the weight bag in a location which does not cover the warning decals on top of the auger housing.

MOUNTING

BAR

CLAMP

 

WEIGHT

 

BAG

 

5/16-18 x 1-1/2

CAPSCREWS

AUGER HOUSING

 

FIG. 8

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Snow Thrower Model NumberStatic Electricity Hazard TrainingPreparation OperationAPI-SF-SJ Maintenance and Storage16-18 Service and AdjustmentsParts Packed Separately in Carton 14-15Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Weight BAG See Fig Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Know Your Snow Thrower OperationRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig To Throw Snow See FigScraper BAR Before Starting the EngineTo Start Engine Before Stopping Snow Throwing TipsIf Recoil Starter has Frozen Lubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Page KEY Part Description Page 183334 Knob, Lever Repair Parts Snow Thrower Model Number PP5524ESA Handles Repair Parts Snow Thrower Model Number PP5524ESA Handles Repair Parts Snow Thrower Model Number PP5524ESA Drive Washer, Flat 11 6 3452 KEY Part Description Page KEY Part Description Limited Warranty

PP5524ESA specifications

The Poulan PP5524ESA is a powerful and robust snow blower designed to tackle winter challenges with ease. This reliable machine is engineered for homeowners who need efficient snow clearing solutions for driveways, sidewalks, and patios. It combines user-friendly features with advanced technology to deliver outstanding performance and convenience.

One of the standout features of the PP5524ESA is its 24-inch clearing width, allowing it to handle large areas of snow quickly. The 5.5 horsepower engine delivers superior power, enabling the machine to cut through heavy and compacted snow with efficiency. Coupled with an auger and impeller system, the snow blower effectively collects and discharges snow up to 35 feet away, making it an ideal choice for heavy snow conditions.

The PP5524ESA is built with an electric start option, allowing users to start the machine easily with the push of a button, even in frigid temperatures where traditional pull starts can be a struggle. Additionally, the snow blower features six forward speeds and two reverse speeds, providing versatility and control over various snow types and conditions. This flexibility allows users to adjust their speed according to the terrain and snow depth, ensuring optimal performance.

The ergonomic design of the PP5524ESA contributes to user comfort. It is equipped with anti-vibration handles that reduce fatigue during extended use, making it easier to maneuver around obstacles. Furthermore, the adjustable chute control allows users to direct the snow discharge with precision, preventing unwanted snow accumulation on walkways and driveways.

Durability is a key characteristic of the Poulan PP5524ESA. The sturdy construction and high-quality materials ensure that it can withstand harsh winter weather and rigorous use year after year. The machine also features heavy-duty tires that provide excellent traction, helping it navigate through snow and uneven surfaces without getting stuck.

In summary, the Poulan PP5524ESA is a reliable and efficient snow blower equipped with a powerful engine, user-friendly features, and durable design. With its significant clearing width, adjustable speed settings, and advanced snow management technology, this snow blower is an essential tool for anyone dealing with heavy snowfall. Whether you're looking to keep your driveway clear or maintain a safe pathway, the PP5524ESA stands out as a practical and effective solution for winter snow removal.
Top Page Image Contents