Simplicity 1695468, 1695514, 522E Checks Before Each START-UP, Operational Warnings

Page 16

Controls & Operation

GENERAL OPERATION

CHECKS BEFORE EACH START-UP

1.Make sure all safety guards are in place and all nuts, bolts and clips are secure.

2.Check the fuel supply. Fill the tank no closer than 1/4 to 1/2 inch of top of tank to provide space for expan- sion. See your engine Owner’s Manual for fuel rec- ommendations.

3.Check the Auger Control (A, Figure 7) for proper operation. If adjustment is required, see the Troubleshooting and Service section for procedures.

4.Check the Chute Direction Control (B, Figure 7) for proper operation. The discharge chute should rotate freely in both directions. See the Troubleshooting and Service section for procedures.

5.Check the Chute Deflector (C, Figure 7) for proper operation. The deflector should pivot freely up and down. See the Troubleshooting and Service section for procedures.

6.Position the chute at the desired starting direction and set the deflector at the desired angle.

DANGER

Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains CARBON MONOXIDE, an ODORLESS and

DEADLY GAS.

DANGER

DO NOT clean out discharge chute with hands. Contact with moving parts in the chute will cause serious injury. Use clean-out tool provided with machine.

WARNING

OPERATIONAL WARNINGS

Clearing The Discharge Chute

To avoid serious injury, do not put your hands into the auger housing or discharge chute. If the auger stalls or chute becomes plugged, use the following procedure to remove objects or clear the chute:

1.Release the auger control.

2.Shut off the engine.

3.Remove the key.

4.Wait for all moving parts to stop.

5.Use the clean-out tool to remove foreign objects and clear the chute or auger. Never put your hands into the auger or discharge chute.

6.If servicing is needed, remove cover and disconnect spark plug wire.

Discharge Chute Adjustment

Release the auger control and make sure the auger has STOPPED before rotating the discharge chute or adjusting the deflector. DO NOT place hands near the auger while the engine is running.

Thrown Objects

Objects can be thrown by the snowthrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from the area.

Slope Operation

For your safety, operation on slopes should be in an up and down direction only. If it becomes necessary to move across the face of a slope, use caution and do not activate the auger. Be very careful when changing direction on a slope.

Proper winter footwear is recommended for the operator to help prevent slipping. Never attempt to clean snow from slopes. The maximum slope for any operation is 17.7% (10º).

Do not use the snowthrower on surfaces above ground level such as the roof of a building.

12

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Print Vendor Instructions Operator’s ManualsPage OPERATOR’S Manual 522E ModelsPage Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Moving PartsSafety Rules & Information TrainingSafety Rules ChildrenProduct Identification CE Identification TAG MarkingsNorth American ModelsInternational Symbols Safety DecalsAssembly Procedure Assembling SnowthrowerTools Required Removal from CartonAssembling the Snowthrower EngineControls Operation Snowthrower ControlsControls & Operation Engine & Starting ControlsChecks Before Each START-UP Operational WarningsAdding Engine OIL Adding FuelStarting the Engine Stopping the EngineOperating the Snowthrower Snowthrowing TipsAfter Each USE OFF-SEASON StorageRegular Maintenance LubricationService Chute Removal InstallationTroubleshooting & Service Cover Removal InstallationTroubleshooting & Service Replace Drive BeltServicing the Spark Plug Servicing Spark PlugAuger Drive Cable Adjustment Specifications Parts & Accessories

522E, 1695468, 1695514 specifications

The Simplicity 522E, along with models 1695514 and 1695468, represents a new era of innovation and performance in outdoor power equipment. These models are designed for users who prioritize efficiency, ease of use, and advanced technology in their lawn care and maintenance routines.

One of the standout features of the Simplicity 522E is its powerful engine, which offers robust performance for various mowing conditions. The engine is designed for reliability, ensuring that users can tackle even the toughest grass with ease. This model is equipped with a high-performance cutting deck that provides a clean and precise cut, promoting healthier grass growth and a pleasing aesthetic for your lawn.

The 1695514 and 1695468 models also emphasize ergonomic design, ensuring that operation is comfortable and user-friendly. With adjustable handles and easy-to-reach controls, these machines reduce operator fatigue during extended use. This consideration for user comfort is complemented by lightweight construction, making maneuvering around the yard a breeze.

In terms of technology, the Simplicity 522E incorporates advanced features such as automatic choke systems, which optimize engine performance by adjusting to varying temperature conditions automatically. This innovative technology aids in starting the engine in all weather conditions, ensuring that users spend less time troubleshooting and more time enjoying their perfectly manicured lawns.

All three models are equipped with a mulching feature that efficiently recycles grass clippings back into the lawn, which can improve soil health and reduce the need for chemical fertilizers. The easy-to-engage mulch mode allows users to switch between mulching and bagging effortlessly, adapting to the specific needs of their lawns.

Durability is another hallmark of these models. Constructed with high-quality materials, the Simplicity 522E and its counterparts are built to withstand the rigors of regular use. This promotes longevity and ensures that users can depend on their equipment year after year.

In summary, the Simplicity 522E, along with models 1695514 and 1695468, combines power, innovation, and user-centered design. With their advanced engine technology, ergonomic features, and emphasis on durability, these models stand out as top choices in the competitive landscape of outdoor power equipment. Perfect for homeowners and lawn care professionals alike, they represent a commitment to quality and performance in every aspect.
Top Page Image Contents